13th International Conference on Fracture June 16–21, 2013, Beijing, China -10- [6] A.K. Soh, L.C. Bian, Mixed mode fatigue crack growth criteria, Int J Fatigue, 23 (2001) 427-439. [7] K. Tanaka, Fatigue crack propagation from a crack inclined to the cyclic tensile axis, Eng Fract Mech, 6 (1974) 493-507. [8] Y. Xiangqiao, D. Shanyi, Z. Zehua, Mixed-mode fatigue crack growth prediction in biaxially stretched sheets, Eng Fract Mech, 43 (1992) 471-475. [9] A.B. Patel, R.K. Pandey, Fatigue crack growth under mixed mode loading, Fatigue Fract Eng Mater Struct, 4 (1981) 65-77. [10] D.F. Socie, C.T. Hua, D.W. Worthem, Mixed mode small crack growth, Fatigue Fract Eng Mater Struct, 10 (1987) 1-16. [11] J.P. Campbell, R.O. Ritchie, Mixed-mode fatigue-crack growth thresholds in Ti-6Al-4V at high frequency, Scripta Mater, 41 (1999) 1067-1071. [12] Y. Liu, S. Mahadevan, Threshold stress intensity factor and crack growth rate prediction under mixed-mode loading, Eng Fract Mech, 74 (2007) 332-345. [13] P. Lopez-Crespo, A. Shterenlikht, J.R. Yates, E.A. Patterson, P.J. Withers, Some experimental observations on crack closure and crack-tip plasticity, Fatigue Fract Eng Mater Struct, 32 (2009) 418-429. [14] A.M. Abdel Mageed, R.K. Pandey, Studies on cyclic crack path and the mixed-mode crack closure behaviour in Al alloy, Int J Fatigue, 14 (1992) 21-29. [15] J.P. Campbell, R.O. Ritchie, Mixed-mode, high-cycle fatigue-crack-growth thresholds in Ti-6Al-4V: Role of bimodal and lamellar microstructures, Metall and Mat Trans A, 32 (2001) 497-503. [16] M. Feng, F. Ding, Y. Jiang, A study of loading path influence on fatigue crack growth under combined loading, Int J Fatigue, 28 (2006) 19-27. [17] M. Sander, H.A. Richard, Experimental and numerical investigations on the influence of the loading direction on the fatigue crack growth, Int J Fatigue, 28 (2006) 583-591. [18] H.A. Richard, K. Benitz, A loading device for the creation of mixed mode in fracture mechanics, Int J Fract, 22 (1983) R55-R58. [19] M.-L. Zhu, F.-Z. Xuan, Correlation between microstructure, hardness and strength in HAZ of dissimilar welds of rotor steels, Mater Sci Eng A, 527 (2010) 4035-4042. [20] J.-K. Kim, C.-S. Kim, Fatigue crack growth behavior of rail steel under mode I and mixed mode loadings, Mater Sci Eng A, 338 (2002) 191-201. [21] J.R. Yates, M. Zanganeh, R.A. Tomlinson, M.W. Brown, F.A.D. Garrido, Crack paths under mixed mode loading, Eng Fract Mech, 75 (2008) 319-330. [22] J. Tong, J.R. Yates, M.W. Brown, The formation and propagation of mode I branch cracks in mixed mode fatigue failure, Eng Fract Mech, 56 (1997) 213-231.
RkJQdWJsaXNoZXIy MjM0NDE=