| Cover |
1 |
| The interphase elasto-plastic damaging model -
Giuseppe Giambanco, Giuseppe Fileccia Scimemi, Antonino Spada |
3 |
| The damage evolution of 2D-Woven-C/SiC composite under tension loading -
Min-ge Duan, Fei Xu |
13 |
| Structure of micro-crack population and damage evolution in concrete -
Andrey P Jivkov |
22 |
| Meso-scale features and couple stresses in fracture process zone -
Craig N Morrison, Andrey P Jivkov |
32 |
| Meso-scale features and couple stresses in fracture process zone -
Craig N Morrison, Andrey P Jivkov |
42 |
| I/II Mixed Mode Fracture in Graphene -
Bin Zhang, Lanjv Mei |
50 |
| Fracture initiation and size effect in V-notched structures under mixed mode loading -
Pietro Cornetti, Alberto Sapora, Alberto Carpinteri |
59 |
| Three-parameter approaches for three-dimensional crack-tip stress fields -
Chongmin She, Junhua Zhao |
69 |
| In-situ Observation of Mixed Mode Fatigue Crack Growth Behavior in Heat Affected Zone of a Welded Joint -
Ming-Liang Zhu, De-Qiang Wang |
77 |
| Experimental Determination of Mode II Fracture Resistance in Asphalt Concretes -
M.R. Ayatollahi, Sadjad Pirmohammad |
87 |
| A New Test Method for High-Temperature Fracture of Alloys and Some Corresponding Results -
Shaoqin Zhang, Wanlin Guo |
95 |
| On Mixed-Mode Fracture -
Christopher Harvey Christopher Harvey, Liangliang Guan |
103 |
| Coupled fracture mode associated with anti-plane loading of cracks and notches -
Filippo Berto, Paolo Lazzarin |
113 |
| Numerical Solutions of Second Elastic-Plastic Fracture Mechanics Parameter in Test Specimens under Biaxial Loading -
Ping Ding Ping Ding, Xin Wang |
123 |
| Experimental and numerical analysis of mixed mode fracture -
Octavian POP, Mamadou Méité |
136 |
| Cracks under Mixed Mode loading: Questions and solutions for isotropic and graded materials -
Hans. A. Richard, Britta Schramm |
145 |
| A CMOD-Based Hybrid Approach to Determine Fracture Resistance Curve -
Wuchao Yang, Xudong Qian |
155 |
| Simulation of fracture and fatigue damage in stainless steel 304 using a cohesive zone model -
Huan Li, Huang Yuan |
165 |
| The effect of thickness on components of the non-singular T-stress under mixed mode loading -
Yury G. Matvienko, Alexander S. Chernyatin |
175 |
| Experiments on cracks under spatial loading -
Hans A. Richard, Alexander Eberlein |
181 |
| Constraint Effect in Fracture: Investigation of Cruciform Specimens using the J-A2 Method -
Larry Sharpe, Yuh Chao |
191 |
| Fracture analysis in plane piezoelectric media using hybrid finite element model -
Hui Wang, Qing-Hua Qin |
201 |
| Thermo-elastic analysis of a cracked substrate bonded to a coating using the hyperbolic heat conduction theory - Zengtao Chen, Keqiang Hu |
208 |
| Numerical simulations of thermo-electro-magnetic phenomena in YBCO films subjected to strains -
Jing Xia, You-He Zhou |
218 |
| J-integral Calculation of Nonlinear Fracture for Colloidal Soft Material -
Hongyan Wang, Jun Lei |
227 |
| Pre-kinking analysis of a mixed-mode crack in a magnetoelectroelastic layer - Keqiang Hu, Zengtao Chen |
233 |
| Three-dimensional annular saturated crack propagation in ultralow permeability rock under wave & electro-magneto-thermo-elastic fields -
BoJing Zhu, YaoLin Shi |
243 |
| Interaction between an Annular Crack and the Imperfect Interface in Magnetoelectroelastic Layers -
Yansong Li, Longjiang Bian |
258 |
| Numerical simulations of interface cracks in layered magnetoelectroelastic solids under dynamic loadings -
Michael Wünsche, Chuanzeng Zhang |
268 |
| Micromechanical modelling of advanced ceramics -
Patricia Alveen, Declan McNamara |
276 |
| Experimental Investigation on Deformation and Failure of Rock under Cyclic Indentation -
Hao Zhang, Haipeng Song |
286 |
| Investigation of the fracture behavior of tungsten at the micro scale -
Nicola J. Schmitt, Christoph Bohnert |
291 |
| Prediction Model of Cleavage Fracture Toughness of Ferrite Steel -
Kazuki Shibanuma, Shuji Aihara |
299 |
| Investigation of grain-scale surface deformation of a pure aluminium polycrystal through kinematic-thermal full-field coupling measurement -
X.G. Wang, J.F. Witz |
309 |
| Experimental Study on Propagation Rule of Semi-elliptical Surface Crack in Steel Plate Strengthened with FRP under Cyclic Bending Load -
Zhao Chuanyu, Huang Peiyan |
319 |
| Numerical Analysis of KI of Semi-elliptical Surface Crack in X80 Steel Plate Strengthened with FRP under Tensile Load -
Zheng Xiaohong, Huang Peiyan |
325 |
| A Self-consistent Model in the Local Residual Stress Evaluation of 316H Stainless Steel -
Jianan Hu, Bo Chen |
332 |
| Fracture Toughness of SE(B) Specimens of Steel in the Presence of Splitting -
Pablo J. Lara Melcher, Enrique M. Castrodeza |
342 |
| Local approach of fracture on semi-crystalline polymers: contribution of X-ray laminography technique -
Lucien Laiarinandrasana, Thilo F. Morgeneyer |
352 |
| Micro-scale Testing to Evaluate the Fracture Characteristics of Quasi-brittle Materials -
Dong Liu, Peter Heard |
359 |
| Micro-cutting tests: a new way to measure the fracture toughness and yield stress of polymeric nanocomposites -
Hongjian Wang, Li Chang |
369 |
| Mixed-mode crack initiation at the edge of Cu/Si interface in nanoscale components -
Yabin Yan, Kohei Kishimoto |
375 |
| Fracture toughness and toughening mechanisms of unsaturated polyester-based clay nanocomposites -
Mushtaq T. Albdiry, Belal F. Yousif |
385 |
| Interlaminar Fracture Toughness and Fatigue Delamination Growth of CF/EP Composites with Matrices Modified by Nano-silica and CTBN rubber -
Jianing Zhang, Shiqiang Deng |
395 |
| Evaluation on the Factors Influencing Thermal-stress-induced Growth of Sn Nanowires -
Yuan Li, Kentaro Miura |
402 |
| Toughness Enhancement in Nanocomposite Thermosets with Application to Carbon-Epoxy System -
Catalin Radu Picu, Dan Mihai Constantinescu |
409 |
| Improvement of interlaminar mechanical properties of CARALL based on nanofiller interface reinforcement and other fabrication techniques -
Huiming Ning, Yuan Li |
414 |
| Structure and Magnetic Properties of Perovskite LaFeO3 Nanocrystals Synthesized Via Reverse Micelle Technique -
Abdullah A. Saad, Wasi Khan |
425 |
| Cap Effect on Pull-out Behavior of CNT in CNT-reinforced Nanocomposites -
Ning Hu, Yuan Li |
429 |
| Deformation and Failure of Graphene Sheet and Graphene-Polymer Interface -
Mingchao Wang, Cheng Yan |
439 |
| Stress Concentration based on Non-linear Motion Equations and its Application for Non-destructive Detection of Plate -
Jianhua Xiao, Jingjing Wang |
446 |
| Based on Micromechanical Damage of Q345 Specimen’s Acoustic Emission Quantitative Assessment in Tensile Process -
Ying ZHANG, Zi-xing WANG |
456 |
| Some Statistical Parameters of Acoustic Emission Signals in Porous Iron under Static Loading -
Andrey A. Lependin, Victor V. Polyakov |
465 |
| Models for Microcracks Extension and Damage Evolution Based on Acoustic Emissions -
Wang Li, Yuanchun Ye Jinsheng MAO |
470 |
| An Efficient A-FEM for Arbitrary Cracking in Solids -
Qingda Yang, Wei Liu |
477 |
| Analysis of resistance cracking process on the experiment of meso and macroscopic of quasi-brittle materials -
Wang Limin, Xu Shilang |
487 |
| Matched asymptotic expansions in an elastic-creeping material : a new view on the Hui-Riedel equation -
Radhi ABDELMOULA, Gilles DEBRUYNE |
495 |
| The Mechanical Fracture Characterization of Non-Linear Flexible Ceramics Using Digital Image Correlation -
Younes Belrhiti, Ion Octavian Pop |
504 |
| On fracture toughness JIC testing of martensitic stainless steels -
Jianqiang Chen, Yves Verreman |
513 |
| Numerical Modeling and Analysis of Dynamic Crack Propagation in Rubber -
Elsiddig Elmukashfi, Martin Kroon |
522 |
| Fracture of anisotropic materials with plastic strain-gradient effects -
Brian Nyvang Legarth |
532 |
| Nonlinear fracture mechanics metal foams -
Tian You Fan, Hai Yun Hu |
542 |
| Crack delopment and dynamic nature of crack propagation in structures -
Subhash Chanda |
554 |
| Initiation and Interaction of a Pulse Beam of Xenon Ions with an Obstacle -
Vladimir A. Bratov, Sergei I. Fedoseenko |
564 |
| Crack and fracture theory of liquid crystals and quasicrystals -
Tian You Fan |
573 |
| Analysis of Failure Waves with an Elasto-statistical-brittle Model -
Zhijie Jiang, Mengfen Xia |
586 |
| Fracture problem of the thin superconducting strip with transverse crack -
Cun Xue, An He |
593 |
| Fracture behaviors of thin superconducting films with field-dependent critical current density -
An He, Cun Xue |
602 |
| Fracture of Low-dimensional Nanomaterials -
Wanlin Guo, Yufeng Guo |
610 |
| Cracks formation in the vertical co-depositing colloidal crystal -
Ding Lan, Yuren Wang |
614 |
| Fracture of Metallic Ring Samples under Magnetic Pulse Shock Action -
Viktor A. Morozov, Yuriy V. Petrov |
619 |
| On Kinetics of “Diffusion” Cracks and Delaminations -
Ilya Nickolaevich Dashevskiy |
627 |
| The elastic-plastic limit pressure of cylinder under internal pressure using a new yield criterion -
Xiaoyu Liu, Zheng Yang |
635 |
| Finite Element Analysis on Burst Pressure of Steel Pipes with Corrosion Defects -
N.A. Alang, N.A. Razak |
641 |
| Critical Strain Based Ductile Damage Criterion and its Application to Mechanical Damage in Pipelines -
Ming Gao, Rav Krishnamurthy |
651 |
| API 579 G-factors for K Calculations and Improvements For Assessment of Crack-like Flaws in Pipelines -
Shaikh Rahman, Ming Gao |
661 |
| Improved Exploitation of High-strength Steels in Pressure Vessel Design by Simulations Based on Damage Mechanics -
Victoria Brinnel, Christian Schruff |
671 |
| Constitutive modeling and Computational Simulations of the external pressure induced buckling collapse of High Density Polyethylene (HDPE) liners -
Patricia M. Frontini, Federico Rueda |
682 |
| Effects of Specimen Geometry and Mode Loading on Crack Growth Resistance Curves of X80 Pipeline Girth Welds -
Claudio Ruggieri, Leonardo L. S. Mathias |
691 |
| Comparison of different techniques for the monitoring of the Lüders bands development -
J. Petit, D. Wagner |
700 |
| Experimental investigations on the cyclic behavior and fatigue of extruded 2017 aluminum alloy -
Abdelghani May, Lakhdar Taleb |
713 |
| Ratchetting Behaviour of High Strength Rail Steel under Uniaxial and Biaxial Cyclic Loadings -
Chung Lun Pun, Qianhua Kan |
723 |
| An extended cyclic plasticity model at finite deformations describing the Bauschinger effect and ratchetting behaviour -
Yilin Zhu, Guozheng Kang |
733 |
| Time dependent ratcheting-fatigue interactions of tempered 42CrMo steel: Experiments and constitutive model -
Juan Zhang, Haibo Luo |
744 |
| Grain size dependence of the yield stress for metals at quasistatic and dynamic loadings -
Elijah N. Borodin, Alexander E. Mayer |
752 |
| Evolution of perturbations of temperature and dislocation density at high-rate shear deformation of pure metals and alloys -
Alexander E. Mayer, Elijah N. Borodin |
761 |
| Texture evolution in Mg‐Al and Mg‐RE alloy during hot extrusion -
Jie Dong, Jie Sun |
770 |
| A thermo-mechanically coupled cyclic plasticity model at large deformations considering inelastic heat generation -
Qianhua Kan, Guozheng Kang |
779 |
| Influence of Free Surface Roughening on Ductile Fracture Behavior Under Uni-axial Tensile State for Metal Foils -
Tsuyoshi Furushima, Hitomi Tsunezaki |
789 |
| A mechanism-based plastic model to simulate the mechanical properties in nanostructured bimodal metals -
LinLi Zhu, Jian Lu |
795 |
| Combined Self-Consistent and Mori-Tanaka Approach for Evaluation of Elastoplastic Property of Particulate Composites -
Xianghe Peng, Ning Hu |
805 |
| Effect of Nanoparticle Modification on Composite Mode II Delamination -
Ying Zeng, Hong-Yuan Liu |
816 |
| Variation in Thermal Conductivity of CFRP Plates due to Impact Damage -
Mamoru Mizuno, Atsushi Ogawa |
825 |
| Numerical simulation of the influence of particle clustering on tensile behavior of particle reinforced composites; Study of shape of the particles -
Seyed.M.R. Rafieipour Alavi, Armin Abedini |
831 |
| The Effect of Nano- and Micro-Fillers on the Strength and Toughness of PIR Foams Obtained From Renewable Resources -
Janis Andersons, Ugis Cabulis |
841 |
| A Numerical Model to Simulate the Pullout of Carbon Fibre with Radially Grown Carbon Nanotubes -
Yuanyuan Jia, Zuorong Chen |
851 |
| Measurement of Adhesion Energy of Electrospun Polymer Membranes Using a Shaft-loaded Blister Test -
Shing-Chung Wong, Haining Na |
861 |
| The tensile and shear failure behavior dependence on chain length and temperature in amorphous polymers -
Junhua Zhao, Timon Rabczuk |
868 |
| Assessment of damage and long-term strenght of polyethylene -
P-Y Ben Jar |
878 |
| 3D Analysis of Amorphous Polymers Deformation under Mode I -
Shu Guo, Rafael Estevez |
887 |
| A Damage Model for Sandwich Plate with Viscoelastic Core in three-Points Bending Fatigue Experiments -
Xue QiChao, Zou GuangPing |
897 |
| Observations and Analysis of Fatigue Crack Growth in Circular Notched Polyethylene Specimens -
Byoung-Ho Choi, Ilhyun Kim |
904 |
| The interface debond analysis for sandwich beam with viscoelastic core and steel faceplates -
Zou GuangPing, Xue QiChao |
914 |
| Fracture of rubbers under biaxial loading: A criterion based upon the intrinsic defect concept -
Moussa Naït Abdelaziz, Fahmi Zaïri |
923 |
| Correlation between the dynamic fracture energy and the amount of created surface -
Jean-Benoit Kopp, Jean Schmittbuhl |
932 |
| Influence of crack sharpness on the fracture toughness of epoxy resins -
Alicia Salazar, Yatish Patel |
941 |
| Trouser tear tests of two thin polymer films -
Eskil Andreasson, Nasir Mehmood |
951 |
| Exploring the contributions of variable network structure on rubber elasticity using model silicone elastomers -
Anju R. Babu, Namrata Gundiah |
962 |
| 8. N. L. Jessamine, C. Park, G. M. Whitsides, Solvent compatibility of Poly(dimethylsiloxane)- based microfluidic. Anal. Chem., 75 (2003) 6544–6554. |
970 |
| 9. Ian Macmillan Ward DWH. An introduction to the mechanical properties of solid polymers. J.Wiley & Sons, 1993. |
970 |
| 10. A. R. Babu, N.Gundiah, Role of crosslinking and entanglements in the mechanics of silicone networks (under review, Dec 2012). |
970 |
| 11. L. Mullins, Determination of degree of crosslinking in natural rubber vulcanizates. Part IV. Stress-strain behavior at large extensions. J. Appl. Polym. Sci. ,2 (1959) 57-263. |
970 |
| Mode-I Fracture Behaviors of a Shear Thickening Fluid as Adhesive Layer under Different Loading Rates -
Maisha Tabassum, Lin Ye |
971 |
| Dynamic Growth of Voids under Effects of Thermal and Vapor Pressure in Electronic Packaging -
Xiaohu Yao, Yue Mei |
981 |
| Fatigue crack growth in the contact wire of railway catenary -
Si Hai Mai, Mac Lan Nguyen-Tajan |
987 |
| New Fatigue Life and Durability Evaluating Method of High Speed Train Carbody Structure -
BingRong Miao, WeiHua Zhang |
995 |
| Safe Life and Damage Tolerance Concepts of Railway Axles -
Dietmar Klingbeil, Uwe Zerbst |
1002 |
| Analysis of fatigue crack initiation and propagation in ship structures -
Wengang Mao, Jonas W Ringsberg |
1012 |
| On the Mechanism of Martensite Formation during Short Fatigue Crack Propagation in Austenitic Stainless Steel: Experimental Identification and Modelling Concept -
Ulrich Krupp, Ingmar Roth |
1023 |
| Suspension Springs – Experimental Proof of Reliability under Complex Loading -
Matthias Decker, Steffen Rödling |
1032 |
| Influence of different microstructures of the welding zone on the fatigue crack growth behaviour of HSLA steels -
B. Maier, Ch. Guster |
1040 |
| Pit-To-Crack Transition and Corrosion Fatigue of 12% Cr Steam Turbine Blade Steel -
Bernd M. Schönbauer, Andrea Perlega |
1047 |
| Influence of micro-shrinkage on the fatigue behavior of ductile iron -
Paul Kainzinger, Christoph Guster |
1057 |
| Reliability-based Fatigue Life Prediction Method for Compressor Wheel Rub of Turbocharger for Vehicle Application -
Zheng WANG, Zeng-quan WANG |
1066 |
| A Software Tool for the Fatigue Growth Analysis of Multiple 3D Cracks from Fastener Holes -
Yixiu Shu, Yazhi Li |
1072 |
| Residual Stresses Induced by Surface Enhancement Processes -
Yukui Gao, Zheng Zhong |
1082 |
| 3D FE analysis of shot peening of strain-rate sensitive materials Accounting for Multiple and Repeated Impingement -
Shaker A. Meguid, Fan Yang |
1090 |
| Determination of Residual Stresses in Structural Elements Using Electron Speckle Interferometry Method -
Leonid Lobanov, Vyacheslav Pivtorak |
1098 |
| Surface Integrity and the Influence of Tool Wear in High Speed Machining of Inconel 718 -
Ru Lin Peng, Jinming Zhou |
1107 |
| Isolation of Contributions of Residual Stress andWeldMicrostructure to Fatigue Crack Growth Rates inWelds -
Rui Bao, Ning Tang |
1117 |
| Polymeric Fiber Arrays for Adhesion -
Shing-Chung Wong, Johnny F. Najem |
1127 |
| Influence of Surface Effects and Flexoelectricity on Vibration of Piezoelectric Nanobeams -
Zhi Yan, Liying Jiang |
1134 |
| Revisit on the fractal dimension in damage and fracture -
Chunsheng Lu |
1144 |
| Scaling Behavior in Quasi Static and Impact Fragmentation of Brittle Materials -
Marina Davydova, Sergey Uvarov |
1149 |
| Structural Hierarchy and Dynamic Size Effect of Rock Strength -
Chengzhi Qi, Qihu Qian |
1159 |
| Effect of Stress Singularities on Scaling of Quasibrittle Fracture -
Jia-Liang Le, Mathieu Piechout |
1169 |
| Experimental Validation of the Relationship between Parameters of 3P-Weibull Distributions Based in JC or KJC -
Juan E. Perez Ipiña, Carlos Berejnoi |
1178 |
| Scale Effect of the Tensile Strength of Aligned-Flax-Fiber Reinforced Composite -
Jānis Andersons, Edgars Spārniņš |
1188 |
| Electroelastic analysis of four mode-III cracks originating from a circular hole in piezoelectric materials -
JunHong Guo, ZiXing Lu |
1195 |
| Dynamic response of an interface crack between magnetoelectroelastic and functionally graded elastic layers -
Keqiang Hu, Zengtao Chen |
1205 |
| Parameter identification of a modified dynamical hysteresis model with immune clone algorithm -
Yong Fei Zhang, You-He Zhou |
1215 |
| An opening crack model for thermo-magneto-electro-elastic solids -
Xian-Ci Zhong |
1223 |
| Physical mechanisms of magnetostriction or electrostriction induced interfacial fracture in a bi-layered multiferroic smart composite -
Hao Zhao, Tao Xiong |
1231 |
| On the Dynamic Behaviour of Surface-Bonded Piezoelectric Sensors/Actuators with Partially Debonded Adhesive Layers -
Congrui Jin, Lu Han |
1235 |
| Modeling of isothermal stress cycling degradation of shape memory alloys using non-constant material parameters -
Xiaoyong ZHANG, Xiaojun YAN |
1243 |
| Pre-fracture zone model on magnetoelectrically permeable interface crack between two dissimilar magnetoelectroelastic materials -
Peng MA, Wenjie Feng |
1253 |
| Ideal strength of twinned and perfect NiTi martensite crystal -
Petr Sestak, Miroslav Cerny |
1263 |
| Machining effects on damage evolution in sinter powder metals -
S. Ma, H. Yuan |
1267 |
| Mechanical and Fracture Behavior of Gelatin Gels M. -
M. Czerner, J. Martucci |
1278 |
| Electromechanical stability of cone dielectric elastomer actuator -
Xiaohong Wu, Wenjie Sun |
1288 |
| Mechanics of Gelatin and Elastin based hydrogels as Tissue Engineered Constructs -
Achu G. Byju, Ankur Kulkarni |
1293 |
| Fractional-order Modeling of Linear Viscoelastic Creep in Hami Melon -
Zheng Xu, Wen Chen |
1303 |
| Large Deformation Study of Temperature-Sensitive Hydrogel -
Jianying Hu, Zhiwei Ding |
1310 |
| A strategy to evaluate the properties of circular ring dielectric actuators -
Yin Wang, Jinxiong Zhou |
1317 |
| Analytical solution of swell-induced surface instability for graded hydrogel layers -
Zhigen Wu, Rui Huang |
1322 |
| ECM-Based Statistical Simulation of Progressive Failure in Symmetric Laminates Damaged by Transverse Ply Cracking -
Fang Wang, Junqian Zhang |
1331 |
| Intermittency in brittle cracks: Model experiment in artificial rocks -
Jonathan Barés, Lamine Hattali |
1340 |
| Non-Gaussian statistics and extreme events on experimental facture surfaces -
Yuanyuan Cao, Stephane Vernede |
1346 |
| Introduction |
1346 |
| Material and methods |
1347 |
| Non-Gaussian statistics of fracture surface roughness |
1347 |
| Spatial organization of large fluctuations on fracture surfaces |
1348 |
| Revealing the spatial organization of the extreme events on fracture surfaces |
1348 |
| Statistical properties of clusters of extreme events |
1350 |
| Discussion |
1352 |
| conclusion |
1355 |
| Modeling of Mechanical Response and Progressive Failure of Tri-axially Woven SiCf-SiC Composites -
S. G. Kulkarni, X.-L. Gao |
1357 |
| Evaluation of Strength Statistics of Quasibrittle Structures Based on Mean Size Effect Analysis -
Jia-Liang Le, Augusto Cannone Falchetto |
1366 |
| Study of Ductile-Brittle transition in Fiber Bundle Model Under Mean-Field Approximation -
Subhadeep Roy, Purusattam Ray |
1376 |
| Propagation of tensile planar cracks in highly heterogeneous media: A numerical study -
M. Vasoya, V. Lazarus |
1388 |
| Size effects on compressive strength from a statistical physics perspective -
Jérôme Weiss, Lucas Girard |
1395 |
| Thermally induced creep rupture of fiber bundles -
Naoki Yoshioka, Ferenc Kun |
1402 |
| Acoustic Emissions in Fracturing Paper -
Menka Stojanova, Stéphane Santucci |
1410 |
| Acoustic Emission multiplets during fatigue of aluminum -
Wafa Ben Rhouma, Stéphanie Deschanel |
1418 |
| Understanding the evolution of mechanical properties under irradiation in nuclear glasses via experiments -
Marina Barlet, J.-M. Delaye |
1425 |
| Thickness-dependent lower bounds of fracture toughness of ferritic steels in the ductile-to-brittle transition regime -
Hans-Jakob Schindler, Dietmar Kalkhof |
1432 |
| Experimental verification of optimal strain gage locations for the accurate determination of stress intensity factors -
H. Sarangi, K.S.R.K. Murthy |
1442 |
| Analysis of Crack Retardation Effects and Crack Path in Ship Structure Members on Different Routes -
Fredhi Agung Prasetyo, Wengang Mao |
1452 |
| A Weight Function for Zr-2.5Nb Pressure Tube Burst Test Specimens -
Steven X. Xu, Douglas A. Scarth |
1461 |
| Study on CTOD and microstructure in flash welded joints for 630-730 MPa grade mooring chains -
Shuwei Leng, Zhangmu Miao |
1470 |
| Fracture mechanics model for predicting fracture strength of metallic alloys containing large second phase particles -
Uwe Zerbst, Mauro Madia |
1480 |
| Strain gage radial locations for the accurate determination of mode I stress intensity factors -
H. Sarangi, K.S.R.K. Murthy |
1492 |
| Effect of the pearlite content of ferritic cast iron material on the crack resistance behaviour under dynamic load -
Peter Trubitz, Hans-Peter Winkler |
1502 |
| Study of Fracture Mechanics Assessments in Industrial Applications -
Thorsten Prothmann, Bartolomeus Irwanto |
1512 |
| Safety Assessment and Fatigue Life analysis of Aged Crane Structures -
Kai Qi, Weixiong Wang |
1521 |
| Local fracture behavior and integrity assessment of a dissimilar metal welded joint in nuclear power systems -
Guozhen Wang, Haitao Wang |
1526 |
| AE monitoring and structural modeling of the Asinelli Tower in Bologna -
Alberto Carpinteri, Giuseppe Giuseppe |
1536 |
| Multiscale monitoring of interface failure of brittle coating/ductile substrate systems: a non-destructive evaluation method combined digital image correlation with acoustic emission -
Weiguo Mao, Duojin Wu |
1546 |
| Interfacial mechanics of fiber push-out test: nano-indention technique and cohesive element modeling -
Xi Li, Qingsheng Yang |
1556 |
| Interfacial Delamination of SMA Reinforced Composite under Low Velocity Impact -
Jun Luo, Dongjie Liang |
1563 |
| ECCI and EBSD Study of Subsurface Damages in High Speed Turning of Inconel 718 under Different Tools and Machining Parameters -
Zhe Chen, Ru Lin Peng |
1567 |
| Modelling of molecular bonding with a cohesive zone model strategy -
R. Estevez, G Parry |
1575 |
| Contact Fracture Mechanism of Electroplated Ni-P Coating on Stainless Steel Substrate -
Akio Yonezu, Michihiro Niwa |
1581 |
| Influence of Interface Roughness on the Fatigue Life of Thermal Barrier Coatings -
Robert Eriksson, Sören Sjöström |
1590 |
| Experimental and Numerical Investigation into the Adhesion of PVD Coatings on Minting Dies -
Jason Tunis, Xin Wang |
1600 |
| Experimental study of the influence of thermal shock on mechanical properties of ceramic coating systems -
Xiaona Li, Lihong Liang |
1615 |
| Asymptotic solutions for buckling delamination induced crack propagation in the thin film- compliant substrate system -
Tongqing Lu, T. J. Wang |
1622 |
| A Simplified Approach for the Evaluation of Nearly singular integrals in Boundary Element Method -
Yu Miao, Jiahe Lv |
1628 |
| Evaluation of the Strength of Thin Metallic Films Coated on Brittle Materials by using an Indentation Fracture Method -
Yuzo Nakamura, Takashi Kawabata |
1638 |
| Crack and defect formation in diamond films -
Duosheng Li, Qing H. Qin |
1648 |
| Mechanics of Graphene Bubbles -
Peng Wang, Wei Gao |
1655 |
| Crack Healing Behavior of SiN/SiC Nano-Laminated Films -
Masanori Nakatani, Junki Nishimura |
1665 |
| Mechanical Properties and Fracture Behavior of Poly(vinylidene fluoride)-Polyhedral Oligomeric Silsesquioxane Nanocomposites by Nanotensile Testing -
Fanlin Zeng, Yizhi Liu |
1671 |
| Fracture behavior of thin aluminum films on soft substrate -
Dan Wu, Huimin Xie |
1679 |
| Self-patterning through thin film buckling -
Jean-Yvon Faou, Guillaume Parry |
1685 |
| Towards interface toughness measurement in nanometric films -
Guillaume Parry, Jean-Yvon Faou |
1689 |
| Study of the creep damage properties of asphalt mixture under static load -
Zhou Zhigang, Feng Lin |
1695 |
| Analysis on Arithmetic and Application of Rigidity Distribution for Simply Supported Structure -
Ling–bo WANG, Xin Kang |
1705 |
| Fatigue Safety Monitoring and Fatigue Life Evaluation for Existing Concrete Bridges -
Chun-Sheng Wang, Mu-Sai Zhai |
1714 |
| Application Research of Elastic-plastic Fracture Toughness Index CTOD in the Design of Railway Steel Bridge -
Yuling Zhang, Jiyan Pan |
1723 |
| Fatigue Strength and Fatigue Life Evaluation of National Cultural Relic Steel Bridges -
Chun-Sheng Wang, Lan Duan |
1733 |