| Cover |
1 |
| A Criterion for the Ductile Fracture of Mild Steel - M. Nagumo |
3 |
| A New Method for Fracture Toughness (KIC )- Determination - G. Feddern, E. Macherauch |
6 |
| A Study of the COD Concept for Brittle Fracture Initiation - T. Kanazawa, S. Machida, Y. Hagiwara, K. Itoga, H. Tsuchiya |
9 |
| Applied Stress and Residual Stress near the Crack Tip of Precracked Specimens - G. Hellwig, E. Macherauch |
12 |
| Contribution to the Study of Slow Crack Growth Conditions in Thermomechanically Treated Ultra-high Strength Steels - L. Hyspecka, M. Tvrdy, K. Mazanec |
15 |
| Correlation of Brittle Fracture Strength and Chevron Notched Charpy Impact Test Results - S. Kanazawa, K. Minami, K. Miya, S. Sato |
18 |
| Dependence of Stress Wave Emission upon Brittle and Ductile Fracture Mechanisms - M. Mirabile, E. Palombi |
21 |
| Dynamic Crack Opening Displacement; Effect of Yield Stress; Relation with overall Strain - G. Pluvinage, B. Savage, F. Montariol |
24 |
| Dynamic Toughness Measurements by Instrumented Drop Weight Impact Tests - J. C: Radon, A. P. Glover, C. E. Turner |
28 |
| Effect of Plate Thickness on Brittle Fracture Initiation and Arresting Characteristics for Very Thick Plates - K. Ikeda |
31 |
| Effect of Thickness Variations upon the Plane Stress Fracture Resistance Parameter Kc - A. M. Sullivan, C.N. Freed, J. Stoop |
34 |
| Einfluß der Dehngeschwindigkeit auf die an Groß – und Kleinproblem ermittelte Kenngroße der linear-elastischen Bruchmechanik - E. Schmidtmann, H. Scherber |
37 |
| Errors Associated with Fracture Mechanics Testing - S.D. ANtolovich, G. R. Chanani |
40 |
| Experimental Equipment for Studying Mechanical Properties of Materials under Multiaxial Loading with a Wide Temperature Range - N.V. Novikov, A. A. Lebedeyev, B. I. Kovalchuk, V. P. Lamashevsky |
43 |
| Fracture Toughness Characterization of Several Aluminium Alloys in Semibrittle Fracture - J. Eftis, H. Liebowitz, D. L. Jones |
46 |
| Fracture under Constrained Deformation - M. W. Taylor, G. Mayer |
49 |
| Mechanical Behaviour and Transformation Characteristics of Trip Steels - D. N. Lai, U. Block, V. Weiss |
52 |
| Modelluntersuchungen zum Bruchverhalten in ingomogenen Materialen unter statisher Belastung - G. Klein |
55 |
| New Test Method Measuring Crack Arrest Properties of Steel - K. Ishikawa, K. Tsuya |
58 |
| On the influence of Prestraining on the Fracture Toughness of Structural Steels - A. Kochendorfer |
61 |
| Physical Aspect of Plasticity in Linear Fracture Mechanics - G. S. Pisarenko, A. J. Krasowsky, G. N. Nadezhdin |
64 |
| Relationship between the Fracture Toughness and the Morphology of the Fracture Surface in Steels Resistant to Atmospheric Corrosion - J. Rittinger, P. Tardy |
68 |
| Some Mechanical Properties of Solids Tested under Superposed Hydrostatic Pressures - A. S. Wronski |
71 |
| Strain and Stress Distribution in Fully Plastic Notched Bars and the Criterion for Ductile Rupture Initiation - S. A. Mohamed, A.S. Tetelmann |
74 |
| Study of Crack Initiation – Arresting Conditions in Plane Plates and Cylindrical Model Vessels - M. Brumovsky, K. Kàlna, S. Stepànek, A. Urban |
78 |
| Suggestion of Another Idea of Fracture - T. Sendo |
82 |
| The Determination of KIC Values from Measurements of the Critical Crack Tip Opening Displacements at Fracture Initiation - J. N. Robinson, A. S. Tetelman |
85 |
| The Effect of Temperature and Loading Rate on the Fracture Toughness of Ti-6Al-4V and 70705 - K.H. Galda, F. Link, D. Munz |
89 |
| The Effects of Local Plastic Strain on Crack Propagation - J. Q. Clayton, C. B. Rogers, F. P. Bullen |
92 |
| The Measurements of Gc under Dynamic Conditions from Crack Propagation Velocity - G. Gandolfi, M. Mirabile, S. Venzi |
95 |
| The Significance of General Yielding Fracture Mechanics in the Brittle Fracture Evalution of Structural Steels - J. M. Diez, G. Frederick |
98 |
| The Stresses in the Progress of Crack in Tubolar Specimens - A. Krisch |
101 |
| Effects of Large Geometry Changes in Crack Tip on Ductile Fracture - H. Miyamoto, T. Miyoshi |
104 |
| A Concept of Combined Micro and Macro Fracture Mechanics to Brittle Fracture - T. Yokobori, A. Kamei, T. Kogawa |
107 |
| A Ductile-Fracture Instability Model Based upon reduction of geometrically - Necessary Dislocations - W.W. Gerberich, W. Reuter |
110 |
| A Quantitative Model for the Temperature, Strain Rate, and Grain Size Dependence of Fracture Toughness in Low Alloy Steel - S. Ensha, A.S. Tetelmann |
113 |
| A refined Theory of Spherical Shell with Cracks - G.C. Sih, H.C. Hagendorf |
117 |
| A Rupture Criterion for Ductile Fatigue Crack Advance - P. Neumann |
120 |
| A Statistical Theory of Fracture Kinetics of Inhomogeneous Materials - A.N. Orlov, V.A. Petrov, V.I. Vladimirov |
123 |
| A Thermally Activated Model for the Plastic Flow and Fracture of Solids - D.D. Cioclov |
126 |
| Analysis of Random Cracks and Elliptical Holes - M. Isida |
129 |
| Atomic Crack Simulation in Fracture Mechanics - P.O. Gehlen, G.T. Hahn, M.P. Kanninen |
132 |
| Bending of an Elasto-Plastic Cracked Plate, Including the Effects of Crack Closure - D.P. Jones, J.L. Swedlow |
135 |
| Betrachtungen zur Ausbildung von plastischen Verformungen bei dreiachsigem Spannungszustand - V. Safta |
138 |
| Crack Tip Plasticity and Fracture Initiation Criteria - J.R. Rice |
141 |
| Cracks in Regions of Complex Geometry. Effects of External Loading, Residual and Temperature Stresses on Initiation of Crack Growth - K. Markstrom |
144 |
| Critical Crack Opening Displacement In Low Strength Steels - C.G. Chipperfield, J.F. Knott, R.F. Smith |
147 |
| Finite Elements and Fracture - J.H. Argyris, W. Aicher, J. Doltsini, K. Willam |
150 |
| Growth of Distributed Cracks under Fatigue Loading - H. Kitagawa, M. Isbida, T. Ohira, M. Kuroda |
152 |
| Hole Nucleation by Inclusion Separation in Ductile Fracture - A.S. Argon, J. Im |
155 |
| Influence of Grain Boundary Carbide on Brittle Fracture - K. H. Reiff |
158 |
| Influence of Non-Singular Stress Terms on Small Scale Yielding at Crack Tips in elastic-plastic Materials - S.G. Larsson, A.P. Carlsson |
161 |
| Introduction to the Diffusional Theory of Metal Fatigue - S. Pilecki |
164 |
| Kinetic Theory Approach to Fatigue Crack Propagation - T. Yokobori, M. Yoshida |
167 |
| Microscopical Mechanisms of Crack Growth - V.I. Vladimirov, V.I. Smirnov |
170 |
| On the Validness of Critical Stress-Intensity Factors - H.C. van Elst |
173 |
| Post Yield Analysis and Fracture in Notch Tension Pieces - J.G. Sumpter, D.J. Hayes, G.T. Jones, C.E. Turner |
177 |
| Rapid Crack Propagation in Strips of Finite Width - P. Nilsson |
180 |
| Significance of Stress and Strain Fields around Inclusions with Respect to Fatigue Failure - G. Harkegard |
183 |
| Strain Fields Investigation in Connection with Failure Criteria Analysis - R.M. Schneiderovitch, O.A. Levin |
186 |
| The effect of High Peak Stresses on Damage Accumulation by Low Peaks - T. Kamata, T. Okada, H. Nakamura |
190 |
| Theoretical Calculation of the Griffith Criterion of Fracture in Anisotropic Media to Investigate the Correlation between Crystalline Directions and the Orientation of the Crack Surface - T. Mura, S.C. Lin |
193 |
| An Interdisciplinary Approach to Fracture and Fatigue Fracture of Solids - T. Yokobori |
195 |
| Bruchvorgänge in Gläsern - P. Kerkhof |
207 |
| Fracture in Rocks and Engineering Implications - C. Fairhurst, M.P. Hardy |
225 |
| Fracture Phenomena in Composites - A. Kelly |
245 |
| Fracture Physics in Comminution - H.R. Rumpf |
259 |
| Fracture Theories in Industrial Use of Thermoplastic and Glassfiber Reinforced Plastics - E. Gaube, H.H. Kausch |
271 |
| Fundamental Knowledge of Fatigue Fracture - O.C. Grosskreuts |
281 |
| Mechanics of Fracture in Polymeric Solids - W.G. Knauss |
295 |
| Relations between Microstructure and the Fracture Toughness of Metals - G.T. Hahn, A.R. Rosenfield |
309 |
| Some Applications of Fracture Mechanics In Power Engineering - R.W. Nichols |
319 |
| Technical Application of Fracture Mechanics to Thin-Walled Structures - H. Kihara, K. Ikeda |
331 |
| Testing Methods for Determination of Fracture Toughness of Metals - H. T. Corten |
344 |
| Zur experimentellen Lebensdauer-Ermittlung von Konstruìctionselementen mit zufallsartigen Beanspruchungen - E. Gassnsr |
355 |
| A Study on Fatigue Damage by the Surface Observation of Electrodeposited Copper Crystals - H. Niyamoto, M. Matsunaga, Y. Hagiuda, N. Chiba |
371 |
| An Effect of Prior Austenite Grains on the Fatigue Strength of Martensitic Structure - T. Kunio, M. Shimizu, K. Yamada, S. H. Song |
374 |
| Correlation between Fracture Toughness and Stretched Zone Size - D. Broek |
377 |
| Correlation between the Fracture Toughness and Material Ductility - V. Weiss, M. Sengupta |
380 |
| Crack Propagation Properties in Low Alloy Carbon and Their Microfractographic Analysis - H. Takashima, T. Urashima, Y. Yazaki |
383 |
| Crack Size and Grain Size Dependence of the Brittle Fracture Stress - R. W. Armstrong |
386 |
| Creep Recovery under Cyclic Plastic Strain - T. Udoguchi, Y. Asada, T. Hiroe |
389 |
| Dislocation Processes and Plastic Work in Dependence on Crack Velocity in Ionic Crystals - V. H. Schmidt, G. Zies |
392 |
| Effects of Pulsed Electron Beam Heating on the Fracture Resistance of High-Strength Aluminium - L. R. Hettche, S. A. Metz, A. L. Cox |
395 |
| Effects of Residual Impurities, Carbide Precipitation, and Carbide Stabilization on the Toughness of Alloy Steels - C. J. McMahon |
398 |
| Effects of Structural Changes on Fracture- Mechanic Characteristic Magnitudes - W. Dahl, W.-B. Kretzschmann |
401 |
| Ermüdungsrißverlauf und Fraktographie von Ermüdungsbrüchen in Aluminium- und Kupfer-legierungen - S. Kocanda, J. Kozubowski |
404 |
| Fracture and Elevated Temperature for Austenitic Steel under Cyclic Creep Loading - T. Kawasaki, M. Horiguchi, J. Shibuya |
407 |
| Fracture in Hexagonal Closed Packed Metals, Zinc and Beryllium - M. H. Kamdar |
410 |
| Fracture Toughness and Subcritical Crack Growth of Austenitic Manganese Steel - R. I. Stephens, C. P. Saxena, R.C. Rice |
413 |
| Influence of Second-Phase Particles on the Low-Temperature Fracture Behaviour of Iron - L. Roesch |
416 |
| Interpretation of Fracture Behaviour of a Grinding Wheel Material by a Crack-Body Model - H. Miyamoto, K. Homma |
419 |
| Mechanical and Metallurgical Factors Influencing the Assessment of Ductile Fracture Resistance - E. F. Walker, D. Elliot |
422 |
| Microstructure and Fracture Toughness of 18 Ni Maraging Steel Weldments - H.-D. Steffens, K. Seiffert |
425 |
| Misorientation of Blocks and Crystalline Solids Resistance to Fracture - V. I. Betechtin, A. I. Slutsker, A. I. Petrov, S. A. Ivanov, A. N. Bachtibaev |
429 |
| On the Mechanism of Fatigue Crack Advance in Ductile materials - P. Keumann |
432 |
| On the Nucleation of Microcracks in Metals under External Loading - J. Krzeminski, M. Sokolowski |
435 |
| Solute Effects on Deformation and Fracture of Beta Brass - M. M. Shea, N. S. Stoloff |
438 |
| Some Results of Examination of Fractures of Aluminium Cast Alloys, Magnesium Alloyed by Means of Fractography - J. Pirs |
441 |
| The Characterization of Fast Fracture and Arrest in Structural Materials - G. T. Hahn, R. G. Hoagland, M. F. Kanninen, A. R. Rosenfield |
444 |
| The Fracture of Metals with Voids - Y. Ino, Y. Kawada |
447 |
| The Fracture Toughness of Beryllium - R. E. Cooper |
450 |
| The Influence of Superplasticity on the Fracture Behaviour of Zinc Based Alloys - N. J. Y. Adams, J. A. Belk, H. G. Munro, P. M. Williams |
454 |
| The Transition of the Brittle Fracture at Full Scale Yielding to that at Small Scale Yielding - A. Kochendörfer, H. D. Schulze |
457 |
| To the Problem of the Ductile-Cleavage Transition of Fracture - D. Aurich |
460 |
| Catalytic dissociation and stress corrosion cracking - P.J. Ficalora, Ya-lung Hu, H. W. Liu |
463 |
| Der einfluss der Luftfeuchte auf due spezifische bruchenergie in spiegelglas bei constant gehaltenen klein bruchgeschwindigkeiten - H. Richter |
467 |
| Effect of aqueous medium composition at elevated temperatures on fatigue strength of carbon steel - V. G. Azbukin, U.F. Balandin, U.I. Zvezdin, V.V. Potapov, N.N. Tkachenko |
472 |
| Effect of crack tip damage on KISCC with 4340 steel - S. Kanazawa, N. Taniguchi |
475 |
| Hydrogen-induced sub-critical flaw growth in steels under static and cyclic loading conditions - A. H. Priest, P. McIntyre, C. E. Nicholson |
478 |
| Influence of corrosion through tap water on fatigue strength and rate fatigue crack propagation in low carbon steels - J. Kermes, J. Ellinger |
481 |
| On the theory of electrochemical stress corrosion cracking - G. P. Cherepanov |
484 |
| Stress corrosion cracking of Uranium 10 weight per cent molybdenum alloys in gaseous and aqueous environment - A.M. Nomine, D. Bedere, D. Miannay |
487 |
| Stress corrosion of heat resistant materials under hot gases - H. Huff, F. Schreiber |
490 |
| The role of the mechanical factor in stress corrosion cracking - Y. Katz |
493 |
| A Fractographic Study of Fatigue Crack Propagation - R. Koterazawa |
497 |
| An Analysis of the Non-Propagating Fatigue Crack Using the Finite Element Method - K. Ohji, K. Ogura, Y. Ohkubo |
499 |
| An Analytic Approach to Low Stress fatigue Crack Growth in Titanium - J.L. Robinson, P.E. Irving, G.J. Beevers |
502 |
| Analytical Approach to Notch Size Effects In Fatigue - A. Buch |
505 |