| Cover |
1 |
| Failure of Stainless Steels by Corrosion-Fatigue -
C. Amzallag, P. Rabbe, M. Truchon |
3 |
| Fatigue Crack Closure with Negative Stress Ratio Following Single Tensile Overloads in 2024-T3 and 7076-T6 Aluminum -
R. I. Stephens, D. P. Musil |
7 |
| Fatigue Crack Formation Associated with Cyclic Slip Deformation Along Prior Austenitic Boundaries -
T. Kunio, M. Shimizu, K. Yamada, M. Enomoto |
12 |
| Fatigue Crack Growth from a Surface Flaw -
M. Kawahara, M. Kurihara |
17 |
| Fatigue Crack Growth in a High Strength Steel -
E. K. Priddle |
24 |
| Fatigue Crack Growth Model Prediction With Two Coupled Differential Constitutive Equations -
J. Pellas, G. Baudin, M. Robert |
29 |
| Fatigue Crack Growth of Steel in Air and Sea Water Under Constant Amplitude and Random Loading -
P. J. Haagensen |
34 |
| Fatigue Crack Morphology in 304 Stainless Steel Cycled at Constant Stress Amplitude at Elevated Temperature -
A. P. L. Turner |
37 |
| Fatigue Crack Propagation and Crack Closure Behaviour Under Varying Load Conditions -
M. Kikukawa, M. Jono, K. Tanaka, Y. Kondo |
41 |
| Fatigue Crack Propagation in Trip Steels -
A. Plumtree, V. P. Swaminathan |
46 |
| Fatigue Fracture of Thermomechanically Processed Low Carbon Steel -
R. L. Duffin, J. G. Byrne |
51 |
| Fatigue Life Prediction by Amplitude Transformation -
H. Haibach |
55 |
| Fatigue Life prediction for Fillet Welded Details Under Service Loadings -
B. J. Dabell, P. Watson |
60 |
| Fatigue of Fibres by Biaxial Rotation Over a Pin -
J. W. S. Hearle, S. F. Calil |
63 |
| Fatigue Strength of Cross Girder Connections Constructed with 9% Ni Steel Plate -
K. Tanaka, S. Matsuoka |
67 |
| Fractographic Observations on Stress Corrosion Cracking of Some Face-Centered Cubic Alloys -
H. E. Hanninen, J. A. Honkasalo, H.A.A. Pitkanen |
73 |
| Fracture Behaviour and Tensile Properties of litanium Alloys at Elevated Temperatures -
G. Lutjering, A. Gysler |
78 |
| Fracture During Superplastic Flow of Industrial Al-Mg Alloys -
D. M. R. Taplin, R. F. Smith |
83 |
| Fracture in Textured Thin Brass Specimens -
J. Kusnierz |
89 |
| Fracture Initiation and Propagation During Strip Drawing -
H. C. Rogers |
94 |
| Fracture Initiation Under Metal-Working Conditions -
J. W. Spretnak |
98 |
| Fracture of WC-Co Hard Metals -
J. L. Chermant, F. Osterstock |
101 |
| Gaseous Oxygen and Hydrogen Embrittlements of a U-10 Mo Alloy - D. Miannay, J. Corcos, A. M. Nomine |
105 |
| High Cycle Fatigue of Prestrained Components -
M. Bily, V. Kliman, P. Lubusky |
109 |
| High Frequency of Metals, Crack Initiation and Propagation -
St. Stanzl, R. Mitsche |
115 |
| High Temperature Creep-Fatigue Fracture in Cu-Cr Alloys -
A.L.W. Collins, D. M. R. Taplin |
119 |
| High Temperature Fatigue of 304 Stainless Steel -
J. Westwood |
124 |
| High Temperature Properties and Fracture of 4340 Alloy Steel -
B. Kim, A. Shabaik |
130 |
| Hot Ductility and Fracture Mechanisms in a Duplex Stainless Steel -
H. Hero, M. Kilebu, O. Andersen |
134 |
| Hydrogen and Plastic Instability in Deformed Spheroidized 1090 Steel - T. D. Lee, T. Goldenberg, J. P. Hirth |
140 |
| Hydrogen Effects on Fracture of PH 13-8 Mo Steel -
A. W. Thompson |
144 |
| Impaired Ductility in Sheared Edges of HSLA Plates -
J. A. Schey, R. Dillon, J. A. Arnott |
148 |
| Influence of Grain Size and Thickness of Precipitations on the Brittle Fracture of Structural Steels -
N. Dahl, M. Uebags |
152 |
| Influence of Grain Size on the Fracture of Aluminum Alloys -
G. Lutjering, T. Hamajima, A. Gysler |
157 |
| Influence of Mechanical Factors on Fatigue Crack Closure -
K. Ogura, K. Ohji, K. Honda |
163 |
| Influence of Precracking and Grain Size on Fracture Toughness of Structural Steels -
W. Dahl, W. Kretzschmann |
170 |
| Influence of Prior Treatment on High Strain Fatigue Life of Aluminium Alloy RR58 -
P. Rama Rao, G. Malakondaian |
173 |
| Influence of TMT on Fracture Properties of Aluminum Alloys -
K. Welpmann, G. Lutjering, W. Bunk |
177 |
| Intergranular Creep Fracture in Nimonic 80A Under Conditions of Constant Cavity Density -
F. Dyson, M. J. Rodgers |
181 |
| Intermediate Fracture Stress and Fracture Initiation Mode Transitions in the Brittle Fracture of Structural Steels -
A. Kochendorfer |
185 |
| Kinetics of Fracture Propagation in Steels -
L.I. Maslov, M. Arita |
189 |
| Low Cycle Corrosion Fatigue of an Al-Zn-Mg-(Zr) Alloy -
E. A. Starke, Fu-Shiong Lin |
194 |
| Low Cycle Fatigue Strength of Steels and Welds in Relation to Static Tensile Properties -
K. Iida, E. Fujii |
198 |
| Mechanisms of Gas Bubble Embrittlement of Metals -
D. Nix, S. H. Goods |
203 |
| Mechanisms of Improved Creep Rupture Lives by Re-Heat Treatments- J. P. Dennison, B. Wilshire |
208 |
| Metallographic Aspects of Fatigue in Pearlitic Structures -
J. G. Taylor, P. E. Warin, P. Watson |
211 |
| Micro Plastic Strain Energy Criterion Applied to Reversed Biaxial Fatigue - A. Damali, A. Esin |
215 |
| Micro-Structural Effects on the Creep Fracture of 1/2 CrMoV Steel -
G. Dunlop, R. W. K. Honeycombe |
219 |
| Microscopic inhomogeneity of plastic strain and crack propagation in alloys - E. Hornbogen |
224 |
| Microstructure, Plastic Zone Size, and Crack Propagation in Ni Steels -
P. Stratmann |
229 |
| Necking of Elastic-Plastic Cylinders Under Uniaxial Tension -
R. N. Dubey, E. H. Elkholy |
232 |
| Notch Fatigue Life Predictions Using Smooth Bar Fatigue Data -
S. D. Antolovich, A. F. Anderson, K. Zagray |
235 |
| Notes on the Repeated Shear Stress Induced Permanent Strain of Steels - T. Endo |
240 |
| Observations on the Effect of Cementite Particles on the Fracture of Spheroidized Carbon Steels -
J. Gurland, S. P. Rawal |
246 |
| Nuclei for Ductile Fracture in Titanium -
A. W. Thompson, J. C. Williams, J. C. Williams |
250 |
| Observation of Crack Closure Phenomena at the Tip of a Fatigue Crack by Electron Microscopy -
H. Nisitani, M. Kage |
254 |
| On the Fracture Toughness of WC-Co Cemented Carbides -
L. Lindau |
260 |
| On the Mechanism of Low Temperature Intergranular Fracture - R. C. Pond, D. A. Smith, R. H. Wagoner |
264 |
| On the Mechanisms of Fatigue Crack Growth -
P. Neumann, H. Vehoff, H. Fuhlrott |
268 |
| On the Microstructure of the Fatigue Fracture Surfaces in Titanium -
S. Kocanda, J. Kozubowski |
275 |
| On the Threshold for Fatigue Crack Growth -
A. J. McEvily, J. Groeger |
280 |
| On the Transition from Initiation to Propagation of Fatigue Cracks in Plain Steel Specimens -
K. Rahka |
284 |
| Plastic Deformation in the Neck of a-Fe Single Crystals Leading to Fracture -
R. N. Gardner, H. G. F. Wilsdorf |
288 |
| Plastic Zone Formation and Fatigue Crack Growth -
C. Bathias |
293 |
| Porous Rigid Plastic Materials Containing Rigid Inclusions; Yield Function, Plastic Potential and Void Nucleation -
A. L. Gurson |
297 |
| Practical Aspects of Fatigue Analysis of a Weldment -
P. Albrecht, K. Yamada |
302 |
| Practical Aspects of Fatigue Crack Growth in Rail and Structural Steels - S. J. Hill, N. F. Boutle |
306 |
| Precision Matching of Mating Fracture Surfaces of WC-Co Alloys -
S. Bartolucci Luychx |
310 |
| Probability of Fatigue Failure Based on Residual Strength -
R. Talreja, W. Weibull |
313 |
| Propagation of Multiple-Ended Fatigue Cracks in Hybrid Bodies -
P. Marek |
317 |
| Short Rod KIC Tests of Several Steels at Temperatures to 700K -
L. M. Barker, W. C. Leslie |
320 |
| Some Experiments Relevant to Miner's Rule in Fatigue -
J. Awatani, T. Shiraishi, T. Tsukahara |
324 |
| Steel and Alloy Thermal Cycling Fracture -
V. F. Balandin, A. F. Malygin |
328 |
| Stress Concentrations Caused by Grain Boundary Sliding in Metals Undergoing Power-Law Creep -
S. Argon, C. W. Lau |
331 |
| Structural Damage in Sheet Metal Forming -
G. Ferran, S. L. de Andrade |
335 |
| Study of Low Fatigue Crack Growth Rates in 316 Stainless Steel and RR 58 Al Alloy -
C. Bathias, J. Pluvinage, A. Pineau, P. Rabbe |
340 |
| Temperature Dependence of the Impact Properties of Some Aluminium Alloys Containing Low Melting Point Inclusions -
M. Roth, W. A. Miller, W. A. Miller, G. C. Weatherly, G. C. Weatherly |
343 |
| Tensile Yield and Fracture Behaviour of Beta-III Titanium -
H. J. Rack |
347 |
| The Analysis of Random Load Fatigue Crack Propagation -
W. D. Dover, R. D. Hibberd, R. D. Hibberd |
354 |
| The Ductile Fracture Mechanism in Rare-Earth-Treated HSLA Steels -
J. D. Boyd, K. M. Pickwick |
359 |
| The Effect of Environment on Crack Growth in a Stainless Maraging Alloy - R. Brook, J. M. West, R. T. Towers |
364 |
| The Effect of Frequency Changes on Fatigue Crack Growth in 7178-T6 Aluminium Alloy -
A. W. Bowen, P. J. E. Forsyth |
370 |
| The Effect of Frequency on Cyclic Crack Growth in 200 Maraging Steel in a Salt Water Environment -
R. Eisenstadt, D. L. Smail |
374 |
| The Effect of Microstructure on Fracture of a New High Toughness Titanium Alloy -
J. C. Chestnutt, C. G. Rhodes, R. G. Berryman, F. H. Froes, J. C. Williams |
379 |
| The Effect of Phase Transformation on the Tensile Fracture of Austenitic Stainless Steels -
S.N. Monteiro, H. Fonseca |
383 |
| The Effect of Prior Temperature Cycling on Rupture Life of Superalloys -
D. A. Woodford |
387 |
| The Effect of Residual Stresses on the Fatigue Failure of a Nitrided EN41B Steel -
J. W. Martin, B. K. Jones |
393 |
| The Effect of Temperature on Creep Crack Growth in a 1/2% Cr 1/2% Mo 1/4% V Steel -
R. Pilkington, C. L. Jones |
397 |
| The Fatigue Behaviour of Macroscopic Slag Inclusions in Steam Turbo-Generator Rotor Steels -
W. A. Poynton, A. Elsender, R. Gallimore |
401 |
| The Influence of a Fine-Scale Precipitate Dispersion on Cleavage Fracture in Low Alloy Steels -
D. V. Edmonds, J. P. Benson |
405 |
| The Influence of Chemical Composition on the Cyclic Behaviour of Ferrite-Pearlite Steels -
K. Morton, P. Watson |
409 |
| The Influence of Mn Additions on the Fracture Behaviour of an Al-Mg-Si Alloy -
J. W. Martin, J. M. Dowling |
414 |
| The Influence of Water Vapor on Fatigue Crack Plasticity in Low Carbon Steel -
J. Lankford, D. L. Davidson |
419 |
| The Initiation of Cleavage by Ductile Tearing -
M. J. Cowling, J. W. Hancock |
424 |
| The liquid Metal Embrittlement of Zinc and Aluminium -
C. F. Old |
427 |
| The Mechanism of a Fatigue/Creep Interaction in a Low Alloy Steel -
W. J. Plumbridge, R. A. Bartlett, T. E. Chung, E. G. Ellison |
433 |
| The Mechanism of Stress Relief Cracking in Cr-Mo-V Steels -
R. A. Tait, J. F. Knott |
437 |
| The Role of Plastic Fracture Processes in Hydrogen Embrittlement -
A. W. Thompson, I. M. Bernstein |
442 |
| The Role of Texture on Prestrain Embrittlement in Armco Iron -
H. C. Rogers, W. L. Brenneman |
446 |
| The Strength of JIS SNCM8 Steel Under Combined Alternating Stresses -
K. Tanaka, S. Matsuoka |
450 |
| Toughness Variations During the Tempering of a Plain Carbon, Martensitic Steel -
J. E. King, R. F. Smith, J. F. Knott |
455 |
| Use of the Weight Function Concept and the Crack Closing Method for Calculating Stress Intensity Factors in Plane or Axisymmetric Problems -
J. Heliot, J. Vagner |
460 |
| Void Growth and Localization of Shear in Plane Strain Tension -
M. Perra, I. Finnie |
465 |
| Weibull Statistics for a Biaxial Strength Test -
D. G. Rickerby |
470 |
| A Contribution to the Analysis of Quasi Static Crack Growth in Sheet Materials -
U. de Koning |
475 |
| A Crack Growth Gage for Assessing Flaw Growth Potential in Structural Components -
F. Grandt, R. L. Crane, J. Gallagher |
479 |
| A Crack Near Doubly Riveted Stiffeners -
D. J. Cartwright, W. Ke Jen |
483 |
| A Criterion for Strength of Structural Materials in a Complex Stress State at Low Temperatures -
A. Lebedyev |
489 |
| A Description of the Dependence of Fracture Resistance on Cracklength - H. C. van Elst |
492 |
| A Finite Element Analysis for Determining Dugdale Model Solutions of Cracked Bodies -
C. L. Chow, K. J. Lau |
497 |
| A Finite Element Analysis of a Circumferentially Notched Tensile Specimen -
D. K. Brown, R. M. McMeeking |
502 |
| A Finite-Element Analysis of an Impact Test -
J. A. Aberson, J. M. Anderson, W. W. King |
506 |
| A Finite-Element Analysis of an Impact Test -
J. A. Aberson, J. M. Anderson, W. W. King |
509 |
| A Fractographic Study on Evaluation of Fracture Toughness -
K. Hirano, H. Nakamura, J. Kobayashi, H. Nakazawa |
512 |
| A Numerical Approach for Stable Crack Growth and Fracture Criteria - G. Rousselier |
518 |
| A Path Independent Integral for Symmetric Stress Diffusion Fields Surrounding Line Cracks -
E. C. Aifantis, W. W. Gerberich |
522 |
| A Simple Analytical Model for the Thickness Dependent Transition from Plane Stress to Plane Strain in Bodies with a Crack -
G. Prantl |
528 |
| A Study of Conditions Leading to Fragmentation on Failure of Zirconium Alloy Pressure Tubes -
B. W. Pickles, E. R. Johnson, H. Cocks |
533 |
| A Transient Finite Element Analysis of Unstable Crack Propagation in Some 2-Dimensional Geometries -
P. N. R. Keegstra, J. L. Head, C. E. Turner |
538 |
| About the Process Zone Surrounding the Crack Tip in Ceramics -
E. Buresch |
543 |
| An Analytical R-Curve Expression of a Brittle Matrix Composite Containing Discontinuous Fibres -
J. C. Lenain |
546 |
| An Approximate Three-Dimensional State of Stress in the Vicinity of a Crack -
Y. Chen |
550 |
| An Empirical Strength Theory for Compact Bone -
W. C. Hayes, T. M. Wright |
553 |
| An Equivalent Inclusion Method for a Three-Dimensional Lens-Shaped Crack in Anisotropic Media -
T. Mura, C. Cheng, C. Cheng |
557 |
| An Experimental and FEM Study on Crack Opening Displacement -
A.- S. Kuo, H. W. Liu |
561 |
| Analysis for the Problem of Misfitting Inclusion and Circular Arc Cracks in a Sheet -
R. Narayan, R. S. Mishra, R. K. Pandey |
567 |
| Analysis of Branched Cracks Under Biaxial Stresses -
H. Kitagawa, R. Yuuki |
571 |
| Analytical Determination of Stress Intensity Factors of Eccentric Cracks by Variational Method -
H. Kitagawa, H. Ishikawa |
577 |
| Anisotropic Fracture of a Hot-Stretched Acrylic Thermoplastic - K. Williams |
582 |
| Assessment of Failures Beyond the Linear Elastic Regime -
I. Milne |
587 |
| Blunting Effects on Fracture Toughness of Low Strength Steels -
S. Banerjee, R. K. Pandey |
592 |
| Bond Fracture Strength in Ceramic-to-Metal Joints -
R. Pabst, G. Ellsner |
598 |
| Branching of Hertz Cracks -
H. P. Kirchner, R. M. Gruver |
601 |
| Brittle Fracture and Subcritical Crack Growth in a Ceramic Structure -
G. G. Trantina |
605 |
| Brittle Fracture Design of Structures - Yu N. Rabotnov, G. S. Vasilchenko, P. F. Koshelev, G. Merinov |
609 |
| Brittle Fracture Under Biaxial Normal Stress -
M. C. Shaw, R. Komanduri |
614 |
| Charting the Fracture Toughness Characteristics of Castings Using the Double Torsion Method -
J. T. Berry, C. W. Ten Haagen |
619 |
| Crack Nucleation in 316 Stainless Steel Fuel Cladding -
D. Lee, R. A. Rand, G. G. Trantina |
624 |
| Crack Propagation in a Two-Phase Material such as Concrete -
F. W. Wittman, J. W. Zaitsev |
629 |
| Crack Propagation Initiation in Ductile Structures -
J. Lebey, R. Roche |
633 |
| Crack Shape Study in a Brittle Non-bonded Particular Composite -
J. D. Embury, D. J. Green, P. S. Nicholson |
639 |
| Crack-Tip Stress Analysis from Field Values of the 103 Displacements Using Complementary Energy -
L. Swedlow, M. E. Karabin, G. E. Maddus |
644 |
| Creep Fracture of Concrete in Prestressed Concrete Members during Manufacture -
Yu. V. Zaitsev, E. N. Scerbakov |
648 |
| Cyclic Deformation and Craze Growth in Polycarbonate -
P. Beardmore, S. Rabinowitz |
651 |
| Dependence of Lifetime Predictions on the Form of the Crack Propagation Equation -
S. M. Wiederhorn |
655 |
| Determination of Crack Growth in a Mixed Mode Loading System -
A. de S. Jayatilaka, I. Jenkins, S. V. Prasad |
660 |
| Determination of Critical Stress-Intensity Factors Under Mixed Mode Loading Conditions by Shadow Optics -
H. Kordisch, U. Soltesz, U. Seidelmann |
665 |
| Development of a C-Shaped Fatigue Specimen -
B. Mukherjee |
669 |
| Direct Measurement on Plastic Zones of Side Grooved Fracture Toughness Specimens -
S. Nunomura, Y. Higo, K. Seto |
673 |