| Cover |
1 |
| Crack Spreading in Viscoelastic Bodies with account of Ageing Material Peculiarities -
V. M. Pestrikov |
3 |
| Cracking in Surface-Adjacent Layers of KDP Single Crystals: Effect of Local Stress Concentration Regions -
L V. Atroshchenkn, A.I. Kolodyazhnyi, M.I. Kolybayeva, V.I. Salo, V. V. Khodeyeva, L.A. Chirva |
8 |
| Creep Crack Growth Criterion -
S.I. Olkin |
12 |
| Creep Damage Occurrence in an Inter-Superheater Steam Pipe after 90,000 Hours of Operation -
V. SijaHki-Zeravcic, A. Markovic, Z. Stamenic, D. Milanovic, P. Knezevic |
16 |
| Creep Failure in Linear and Nonlinear Viscoelastic Materials -
A.N. Joshi |
20 |
| Creep Fracture in Hastelloy XR -
A.T. Kikuchi, I.J. O'Donnell |
36 |
| Creep Rupture Properties of Cr-Mo Steel -
S. Ahila, S. Ramakrishna Iyer |
41 |
| Critical Cleavage Stress F and Problem of "Brittle" Strength of Metals -
S.A. Kotrechko, Y.Y. Meshkov, O.S. Melius |
45 |
| Damage Characteristics of Laser-Material Interaction in AlLiCuMg Alloy -
A. Milosavljevic, M. Sreckovic, M. Dinulovic, K. Kavacecic, B. Andlecicc, R. Prokic-Cvetkovic, Z. Radakovic, M. Radavic |
50 |
| Deformation and Failure Mechanisms in a Spray Formed Al Alloy-SiC Composite -
J. Llorca, J. Ruiz, M. Elites |
53 |
| Deformation and Fracture of Nodular Iron with Ferrite Matrix -
Z.R. He (He Zerong), S. Ji, G.X. Lin |
58 |
| Deformation Localization and Prefailure of Steels under Low Temperature -
V.P. Gulyaiev |
63 |
| Destruction of KDP Single Crystals at Tetragonal-to-Monoclinic Modification Phase Transition -
L.V. Airoshchenko, M.I. Kolybayeva, M.A. Rom, V.I. Salo, V.F. Tkacftenko, V V. Khodeyeva |
66 |
| Determination of Parameters for Numerical Models of Concrete Fracture -
J.G.M. Van Mier, E. Schlangen |
70 |
| Effect of Anisotropy on Crack Resistance of Polymer Composites for Aircraft Building -
B. V. Perov, A.G. Khanin, S.A. Katyukha |
75 |
| Effect of Environment and Stress Ratio on the Fatigue Crack Propagation of Polycarbonate -
N. Singh, R. Khelawan |
79 |
| Effect of Gamma Prime Precipitate Size on the Mechanical Properties of a Cast Nickel-Base Superalloy -
A .A. Tipton |
84 |
| Effect of Heat Treatment on Stiffness and Damping of SiC/Ti-15-3 -
Joseph E. Grady, Bradley A. Lerch |
87 |
| Energetic Approach to Fracture Toughness Estimation of Hardened Cement Paste and Concrete -
Vu.V. Zaitsev, V.I. Shevchenko |
93 |
| Enhancement of Tensile Properties of Al/SiCp MMC Sheet by Optimisation of Solution Treatment -
M. P. Thomas, T. Kilgour, J.E. King |
98 |
| Epoxy-Epoxy Bimaterial Interface Cracks in Annealing Residual Stresses - M. R. Shanbhag, S.K. Maiti. K. Eswaran, P.B. Godbole |
103 |
| Experimental Study of Micromechanisms of Brittle-to-Ductile Transition in Si Single Crystals -
K.J. Hsia, A.S. Argon |
107 |
| Fatigue and Fracture of Microalloyed Steels: An Overview -
A. Fatemi, L. Yang |
113 |
| Forecasting Metallic Material Creep and Failure under Static Loading -
R.G. Teteruk |
118 |
| Fracture Behaviour of a Dual Phase Steel having a High Percentage of Martensite -
K.K. Ray, Asim Bag, P. Bandopadhyay, E.S. Dwarakadasa |
123 |
| Fracture Kinetics of Ceramic Materials in Controlled Crack Growth Test -
S.P. Kovalev, V.M. Chushko, V.G. Burovik |
127 |
| Fracture Mechanism of Structurally and Crystallographically Textured Titanium Billets -
M A. Skotnikova, A.S. Kudrjavtsev |
132 |
| Fracture Mechanisms and Fracture Toughness of Chromium -
A. V. Sameliuk, W.P. Brodnikovsky |
137 |
| Fracture Mechanisms and Fracture Toughness of Molybdenum -
A.Yu. Kovai, A.I. Bankovski |
140 |
| Fracture Mechanisms of Materials with a Brittle-Ductile Transition -
A. D. Vasilev |
143 |
| Fracture of Steel and Cast Iron at Low, Room and High Temperatures - I.P. Volchok, O. B. Kolonlkin |
148 |
| Fracture Toughness of Heterogeneous Martensite in Hypoeutectoid Low Alloyed Steel -
I. Dlouhv, J. Skarek, M. Holzmann |
153 |
| Generalized Continual Theory of Dislocations -
Y.M. Krilchevets. I.M. Tiiarenko, A.A. Kartysh |
158 |
| High Temperature Crack Growth in Dissimilar Media -
T. Chuang, J.L. Chu, S. Lee |
161 |
| High Temperature Embrittlement of Steels: The Role of Aluminium and Sulphur -
R.M. Nikonova, V. V. Zabilsky |
167 |
| Influence of Mode II Stress Intensity Factor on the Fracture Toughness of Concrete -
D. Stys, M. Minch |
170 |
| Influence of Physical-Mechanical Characteristics of Rock Thickness, Bore-Solution Density and Tectonic Strength Value on Stressed State Around Deep Borehole -
A.M. Alimzhanov |
175 |
| Influence of Thermocycling on Structure and Mechanical Properties of the Aluminium-Boron Composite Material -
A V. Filipovskii |
179 |
| Laser-Pulse Interaction with Cu and Ti under Atmospheric Pressure and Vacuum -
A. Milosavljevic, V. Sijacki-Zeravcic, M. Dirtulovic, M. Sreckovic, V. Rajkovic, M. Milosavljevic |
182 |
| Low Cycle and Thermomechanical Fatigue Behaviour of an Advanced ODS Nickel Base Superalloy -
M. Marchionni, E. Picco, D. Ranucci |
186 |
| Mathematical Modelling of Crack Development in Ceramics Under Contact Loading -
V. A. Gorelsky, S.A. Zelepugin |
191 |
| Measurement of the Fracture Toughness of Polymer Concrete -
H.C. Pembenon, F.S.D. Tinsley, J.E. King |
195 |
| Micromechanical Model of Ceramic Matrix Composite Reinforcement Based on Discrete Fiber Distribution - A. A. Rubinstein |
200 |
| Microstructural Aspects of Localization of Deformation and Destruction of Structure-Inhomogeneous Materials -
L V. Kuksa |
205 |
| Mixed Mode Dynamic Fracture of a Ceramic -
X. P. Zhang, R. Neviere, G. Pluvinage |
210 |
| Modelling of the 90° Ply Fatigue Crack Growth along the Width of Cross-Ply Carbon/Epoxy Coupons -
C. Henaff-Gardin, E. Urwald, M.C. Lafarie-Frenot |
216 |
| Nontraditional Approach to Definition of Rock Stability Parameters of Near-Contour zone of Underground Working, Deep and Superdeep Boreholes -
M.T. Alimzhanov |
220 |
| Numerical Method for Modelling Creep Crack Propagation by Diffusive Void Growth -
S.P. Witts, A.C.F. Cocks |
225 |
| On One Possible Approach to Estimating Fracture Time under Creep Conditions -
V.P. Poshivatov |
230 |
| On Structural Aspects of Fracture Toughness of Materials with Limited Plasticity -
S.A. Firstov |
235 |
| On the Singular Character of Thermal Stress for Non-Homogeneous Body with Sharp Notch -
V.A. Kondratev, S.L. Tarakanov |
240 |
| Phase Transformations in Plastic Zones of Austenitic Fe-Ni and Fe-Mn Steels -
N.A. Gorhatenko, G. V. Klevtsov |
243 |
| Pressurized Thermal Shock Tests with Model Pressure Vessels -
H. Keinanen |
247 |
| Some Features and Micromechanisms of Materials Fracture in the-Brittle-to-Ductile Transition Region -
A. J. Krasowsky |
252 |
| Specific Requirements for Cryogenic Use of Materials for Space Engines - J.K. de Manicault |
257 |
| Strength and Fracture of Elastic and Brittle Bodies at Thermal Loading -
A.G. Lanin |
262 |
| Studies of Creep Crack Growth under History-Dependent Loading -
F. W. Brust, B.S. Majumdar |
267 |
| Study on Wood Fracture Properties by Holographic Interferometry And Numerical Simulation -
P. Navi, J. Wang, C. Huet, P.K. Rastogi, L. Pflug |
272 |
| Tensile Tests in SEM of 6061/SiC Composites -
A. T. Dumitrescu, M. Suery |
277 |
| The Effect of Recrystallization on Aluminium Alloys Crack Resistance -
P. Miklyaev, D.A. Andreev |
281 |
| The Effect of the Chemical Composition and Heat Treatment on the Transition Temperatures of the Low Alloy C-Mn Steel Plates -
J. Fila, Z. Zatorski |
286 |
| Themodynamics of Single and Polycrystals Defective Structure -
V. Fedoseev |
291 |
| Transformation Toughening and Fracture in Cu-Al-Ni Shape Memory Alloys -
A. V. Cherepin. I A. Lushankin, E.P. Pechkovsky |
295 |
| A New Analytical Method of the Determination of JIc by using Single Specimen -
X. Jing, Y. Zhen, B. Lou, F. Shen |
299 |
| A Prediction of an Endurance of Welded Structures taking into Account an Effect of Technological Factors -
V.P. Leonov, A. V. Iljin |
304 |
| A Theoretical and Experimental Method for Fracture Parameters Investigation of Cracked Structures - S. V. Shkarayev |
309 |
| Acoustic Emission Monitoring of Cutting Process -
V.E. Wainberg, L.I. DekhtyaR, V.K. Andreychuk |
314 |
| An Engineering Analysis Procedure for Crack Driving Force in Welds -
Y. IV. Shi, J.X. Zhang, M.J. Tu |
317 |
| Application of Dimensional Analysis Method to Generalization of Results of Specimens Fatigue Tests at Various Loading Conditions and Test Temperatures -
B. F. Fedorenko |
322 |
| Application of Fracture Mechanics Approaches for Perfection of Strength Calculations of Welded Joints and Structure Members -
V.I. Makhnenko |
325 |
| Approximation for J based on the Neuber's Relation for Stress and Strain Concentration Factors -
R.V. Riznychuk, S. Ye. Kovchyk, I.B. Rvbytskyj |
330 |
| Asymmetric Crack Extension under Static Loading in Finite Plate -
S.I. Yemelvanov |
335 |
| Bend Durability Prediction in the Design and Operation of Power Plant Pipes -
V.K. Adamovich, A. V. Schedrin, I.I. Minz |
340 |
| Breakage Mechanisms of Complex Parts of Aviation Structures with Account for Technological Heritage - A.S. Zhemakov. I.N. Budilov, V.A. Savchenko |
345 |
| Brittle Fracture Behavior of Welded Wide Plate with Non-continuous Stiffners -
Y.H. Zhang, A.D. Jia |
350 |
| Calculation and Control of the Technical State of Elements and Structures with Cracks -
V.P. Gulvaiev |
354 |
| Computer System for Calculation of Welded Joints with Fillet Welds -
T.G. Ryabchuk |
358 |
| Corrosion Cracking in Sheet Welded Structures -
S.K. Fomichov, V.M. Prokhorenko, O.I. Steklov, V.A. Vetigin |
363 |
| Corrosion-Fatigue Crack Growth Resistance Testing -
I.V. Ratych |
366 |
| Crack Growth Curves for Aluminium Weldments -
D. Kosteas, R. Ondra |
371 |
| Crack-Resistance Tests of Materials: State and Outlooks -
V. A. Makhutov, I.A. Razumovskij, A.I. Tananov |
376 |
| Cracks Kinematics for Brittle Fracture of Rocks in Blasting and Percussive Failure -
E.N. Sher, P.A. Martynyuk |
381 |
| Cyclic Crack Resistance of Welded Joints with Non-Uniform Fields of Residual Welding Stresses -
V.I. Trufiakov. P.P. Mikheev. V.V. Knysh, I.S. Kovalenko |
385 |
| Cyclic Elasto-Plastic Fracture Diagram for a Specimen with a Crack and Its Analysis -
L.A. Sosnovskiy, A.V. Bogdanovich |
389 |
| Destruction of Transmission Towers and Methods for increasing of Reliability of Existing Power Lines -
N.A. Senkin, V.I. Kucheryavy |
394 |
| Determination of Metal Fracture Toughness by Method of Thermal Impulse -
V. Remorov |
399 |
| Development of Methods and Algorithms for Nondestructive Electromagnetic Testing of the Lamellar Composites -
B. I. Kolodiy, O.B. Ljashchuk |
404 |
| Diagnostics and Forecasting of Welded Structure Residual Life (State of the Art and Prospects of Development) -
A.Ya. Nedoseka |
409 |
| Dividing Grids Method in Experimental Fracture Mechanics -
V. Yu. Goltsev, Yu. G. Matvienko |
414 |
| Eddy Current Estimation of Structural Changes in Thin Surface Layers on Nonferrous Materials -
V.N. Uchanin |
418 |
| Effect of Hydrogen on Brittleness of Structural Steels and Welds -
I.K. Pokhodnya, V.I. Shvachko |
421 |
| Electromagnetic Methods of Nondestructive Testing in Fracture Mechanics -
I.T. Nazarchuk |
426 |
| Engineering Application of Fracture Mechanics to Aircraft Structure Damage Tolerance Estimation -
I. Nesterenko |
431 |
| Estimation of Fatigue Life of Structural Members under Irregularly Varying Loads -
Yu.A. Svirskv |
435 |
| Estimation of the Residual Stresses Influence upon Plane Welded Joints Strength -
I.I. Trush, M.P. Berezhnvtsk |
440 |
| Evaluation of Mechanical Properties and Defects in Cast Iron Castings by Ultrasonic Method -
E.S. Ivanushkin |
444 |
| Fatigue Life Prediction Method based on Energy Criterion -
P. A. Fomichev V.V., Zvyagintsev I.Y., Trubchanin A. |
449 |
| Fatigue Life Prediction of Welded Structures based on Combination of Strain and Stress Approaches -
L.K. Steinzeig, K.P. Mandjula |
454 |
| Fractal Analysis of Fracture Surfaces of Constructional Steels -
A. A. Emelyanov, L.E. Portnov. I.J. Peshminlzev, J.V. Pospelov |
458 |
| Fractodiagnostics - Problems and Methods -
L. Bolvina |
461 |
| Fracture Behaviour of Compact Tension Specimen in High Vacuum Atmosphere under Plane Strain Conditions -
M.R. Sabayo |
465 |
| Fracture Behaviour of Low Alloy Steel Weldments -
J.D. Parker, A.W.J. Parsons |
469 |
| Fracture Criteria for 18Cr-10Ni-Ti Stainless Steel Piping -
A.P. Bobrinsky. A.F. Getman, V. Yu. Goltsev, V.M. Markochev |
474 |
| Fracture Mechanism in the Process of Bar Rolled Stock Breakage -
V.A. Timoshchenko, V.V. Kirilovski |
478 |
| Fracture of Plates and Shells with Cracks with Account for the Local Stability Loss -
A.N. Guz', M. Sh. Dyshel' |
483 |
| Fracture Properties of the Selected Ferrous Materials used in Power Transmission Line Hardware -
Gouri S. Bhuyan, Dave H. Carter |
488 |
| Fracture Toughness of Structural Materials and Their Welded Joints -
M.S. Kogut, V.A. Shabaikovych |
494 |
| Fracture Toughness of Welded Joints under Static and Dynamic Loading -
V.I. Kir 'yan |
498 |
| Generation of Acoustic Emission Pulses during Coherent Fracture -
V.I. Ivanov |
502 |
| High-Strength Steels for Operation in Cryogenic Fuels -
A. F. Petrakov, G.S. Krivonogov, V.I. Kozlovskaya, O.A. Krylova |
506 |
| Holographic Diagnostics of Welded Joints and Structures -
L.M. Lohanov, V.A. Pivtorak |
511 |
| Improvement of Impact Toughness of Steel Welded Joints by Explosion Treatment -
V.G. Petushkov, Yu.L. Fadeenko. E. Ya. Lokshina, S.N. Smirnova, A.I. Grishaenko, I.E. Titova |
515 |
| Influence of In-Service and Technological Factors on the Cyclic Fracture Toughness of Turbojet Blades -
M. Nikhamkin. Yu. Plotnikov, I. Konev, L. Voronov, N. Plotnikova |
519 |
| Influence of the Welding Technology on Cracking Resistance of the Titanium Pseudo-Alpha-Alloys -
A.A. Trufanov. V.I. Mikhailov, V.A. Sher |
523 |
| Investigation of AE Properties of the Hoists -
V.R. Skalsky |
527 |
| Investigation of Separation Processes for Construction Elements and Materials at Impulse Loading -
Yu.S. Vorobiev. A. V. Kolodyazhnv, V.I. Sevryukov |
531 |
| Investigation on Crack Propagating Characteristic of Welded Joints -
H. Lixing, Z. Yufeng |
534 |
| Longlife Prognostication of Sliding Tribosystems with Contours - A Slight Difference from Circular Ones -
M.V. Chernets |
539 |
| Metallurgical and Technological Aspects of Brittle Behaviour of Titanium Alloys -
V.V. Klyackina, K.M. Polvanski |
543 |
| Method for Determination of the Fatigue Crack Extension Resistance Characteristics -
V. Ya. Yarema |
548 |
| Method for Determining Crack Resistance of Materials under Biaxial Loading -
A. V. Boiko |
552 |
| Method for Evaluation of Possibility to Prolong Service Life on the Basis of Selective Inspection Results -
V.V. Konovalov, V. Ya. Senik, I.S. Yablonsky |
557 |
| Method of Testing Thin-Walled Pipes in Complex Stressed State -
V.A. Glouschenkov, S.G. Simagina |
560 |
| Methods of Forecasting Articles Destruction with Application of Acoustic Emission -
V.E. Wainberg, L.I. Dekhtyar, V.K. Andreychuk |
564 |
| Micromechanisms of Fracture in Precrackcd Welded Specimens -
K. Geric, S. Sedmak |
567 |
| Monitoring Fracture Toughness using Miniature Samples -
S.D. Norris, J.D. Parker |
572 |
| New Methods of Micro- and Macro-Crack Retardation -
K.G. Lagutin |
577 |
| Numerical and Experimental Studies of the Laws of Low-Cycle Fatigue Crack Propagation in Welded Joints - V.V. Yakubovskii, V. V. Dolezhalov, A.V. Tovmachenko |
582 |
| On Sequence Effects in Random-Load Fatigue -
V.V. Yermolayeva, S.U. Petinov |
587 |
| On Statistical Distribution of Fatigue Crack Growth at Weld Toes -
L.J. Wang, Y.H. Zhang, J. D. Kang |
591 |
| On the Applicability of Damage Models for the Description of the Failure Behaviour of Ductile Steels -
K. Kussmaul, M. Seidenfuss, U. Eisele |
595 |
| Pipelines Resistance Estimation on Unstable Crack Propagation -
G.I. Makarnov |
601 |
| Plastic zone Evolution in Notched Bars: Implications in Environmentally- Assisted Fracture -
I. Toribio |
604 |
| Pneumotests of Vessels using Acoustic Emission Control -
J.P. Borodin. A.D. Domentiew, I.W. Gulewsky, S.N. Iwanow, W. W. Konowalow, W.P. Timochin |
609 |
| Practical Application of Fracture Mechanics Methods in CAD Systems - I.I. Koksharov |
613 |
| Prediction of the Influence of Warm Prestressing Conditions on Pressure Vessel Resistance to Brittle Fracture - V.T. Troshchenko, V.V. Pokrovsky, V. Yu. Podkolzin |
618 |
| Relations between Notch Stress and Crack Stress Intensity Applied to Welded Joints -
D. Radaj, S. Zhang |
623 |
| Residual Life Assessment of Pipeline Bend by a Metallographic Measurement of Cavitation Damage-Determination of the "A" Parameter -
D. Milanovic, V. Sijacki-Zeravcic, A. Markovic, M. Radovic |
628 |
| Statistical Analysis of the Surface Fatigue Crack Growth in Welded Joints -
Y.H. Zhang, L.J. Wang |
633 |
| Temperature Dependence of Fracture Resistance of Different Zones of High-Strength Aluminium Alloy Welded Joints -
T.M. Labur |
638 |
| The Crack Characteristics Related to Fracture of Chip in Machining -
Z.W. Chen, H Z. Wu, M.D. Tan, H.N. Fu |
641 |
| The Experimental Investigation on Deformation and Opening Displacement of Crack Tip -
X. Sun, W. Cao, X. Lu |
645 |
| The Influence of Low Temperatures and Stress Concentration on Mechanical Properties and Fatigue Strength of the HSLA Steels -
J. Fila |
649 |
| The Influence of Open Profiles Warpings upon Kinetics of Cracks Development in Them -
T.I. Rybak |
655 |
| The Relationship between Notch and Fracture Toughness in Steels and Weld metals -
K. Kalna, F. Vins |
660 |
| The Use of Fracture Mechanics for Assessing Reliability of Weld Repaired Steam Turbine Rotors -
A.A. Tipton |
665 |
| The Wave Method for Analysis of Structural Members Injury under Impact -
Yu. A. Rossikhin, M. V. Shitikova |
668 |
| Theoretical Study on Peculiarities of Small Ellipsoidal Defects Detecting and Evaluation in Layered Medias -
A. Orlowsky |
672 |
| To the Theory of Defects Detection in Plate during Its Electromagnetic Sounding -
Z. T. Nazarchuk, O.I. Ovsyannikov |
676 |
| Toughness Comparison between the Reheated Intercritical Zone of Two HSLA Steels –
C.L. Davis, J.E. King |
681 |