ICF10B

ICF100991OR EFFECT OF HYDROTHERMAL AGING ON FRACTURE PROPERTIES OF BONDED TITANIUM JOINTS D. W. Rhymer1 and W. S. Johnson2 1 Department of Engineering Mechanics, U.S. Air Force Academy, USAFA, CO 80840, USA 2 School of Material Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0245 ABSTRACT Fatigue delamination is a major concern for titanium laminate composites, particularly at elevated temperatures. Research has been conducted to investigate the durability of bondlines in titanium laminates following long term hydrothermal exposure. In an effort to determine the optimal titanium-polyimide bond for high-temperature in adverse conditions, Ti-15-3 cracked lap shear specimens were tested with combinations of two different polymeric resins with three different commercially available titanium surface treatments in a variety of exposure environments. After 10,000 hours in both hot (177°C) dry and hot wet conditions, the specimens were fatigued at constant amplitude to demonstrate the optimal resin/surface treatment combination. As was determined by Cobb and Johnson [1] for higher temperature tests after 5,000 hours, Ti-15-3 treated with Boeing’s Sol Gel surface preparation and subsequently bonded together using FM5 polyimide proved the most durable combination. Furthermore, as expected, most combinations exhibited more accelerated fatigue crack growth in the wet condition then the dry condition. KEYWORDS Fatigue, bond, titanium, surface treatment, delamination, elevated temperatures. INTRODUCTION Modern aerospace researchers still endeavor to design aircraft that fly faster and longer then ever before. Such advancement is contingent upon materials capable of operating at long lives (> 10,000 hours) and high temperatures while being fatigue resistant and damage tolerant. Hybrid Titanium Composite Laminates (HTCL) are a type of hybrid composite laminate

RkJQdWJsaXNoZXIy MjM0NDE=