ICF10B

POSTER REFERENCE: ICF100481PR EFFECTS OF PLASTIC STRAIN ON CLEAVAGE FRACTURE PREDICTIONS IN STEEL S. R. Bordet 1, 2, A. D. Karstensen 2, C. S. Wiesner 2 and D. M. Knowles 1 1 University of Cambridge, Department of Materials Science and Metallurgy, Pembroke Street, Cambridge, CB2 3QZ, U.K. 2 TWI, Granta Park, Great Abington, Cambridge, CB1 6AL, U.K. ABSTRACT This work analyses the influence of plastic strain on cleavage fracture in a lower bainitic Grade 450EMZ steel. It is shown that a dual stress/plastic strain criterion is needed to describe the conditions of cleavage initiation and early propagation. This serves to explain why inconsistent and/or unrealistic shape factor estimates for stress-only Weibull distributions of cleavage strengths may be often encountered in the literature. The general ability of small-scale yielding expressions to describe the failure probability of toughness specimens is re-explained in terms of the plastic strain evolutions in fracture specimens. KEYWORDS Cleavage fracture, local approach, constraint, small-scale yielding conditions, bainitic steel, plastic strain INTRODUCTION The cumulative failure probability by cleavage is commonly expressed in terms of a Weibull distribution:          ⌡ ⌠       σ σ−σ = − − pV 0 th f dV P 1 exp m (1) where m, σ0 are, respectively, the shape and scaling factors, σth is a threshold stress below which there is zero probability of failure, Vp is the plastic zone size (or some fraction thereof) and σ is generally the maximum principal stress [1-3]. In the particular case of small-scale yielding (SSY), the integration in Eqn. 1 can be solved as a closed-form expression, as shown by several authors [1-3]. , 2 B B P 1 exp 0 c 0 f α=               δ δ = − − α (2)

RkJQdWJsaXNoZXIy MjM0NDE=