ICF10B

Height Width Load b(mm) w(mm) σ(N/mm2) 30 20 1000 The number of nodes The number of cells Node distribution 29×43 20×30 Uniform distribution σ σ a b b w Figure 4: Finite flat plate with single crack subjected to uniform tension TABLE 2 STRESS INTENSITY FACTORS OF SINGRE EDGE CRACK Error a(mm) a/w(-) Analytical solution Exact solution 5 0.25 0.594 0.595 0.10 10 0.5 1.611 1.584 -1.68 15 0.75 5.800 5.799 -0.02 Stress intensity factors K(×104N/mm3/2) Crack length ) (% e On the basis of the analytical results shown in Table 2, we will arrange nodes and background cells uniformly and calculate stress intensity factor K of DC by EFGM. Figure 3 shows the distribution of nodes and background cells around crack tip. Because DC shown in Figire 1 has a crack in analytical domain, there is a possibility of including the boundary between nodes and evaluation point. Therefore giving equal weight to the nodes across and beyond a boundary causes to decrease accuracy of the solution and therefore we define the domain of influence around a boundary (crack) as shown in Figure 5. Evaluation point Reffered node Not reffered node ρ crack Figure 5: Domain of influence Table 3 shows the analytical results of DC which is changed load direction β(from 0deg to 90deg ) by using EFGM. We get diameter of nugget to be t 5 . TABLE 3 STRESS INTENSITY FACTRORS OF DC

RkJQdWJsaXNoZXIy MjM0NDE=