ICF10B

CONCLUSIONS AND OUTLOOK An early crack initiation brought about by tensile residual stresses or stress corrosion cracking decreases finite fatigue life as well as the endurance limit. Compressive residual stresses improve the fatigue behaviour in air, only. More specimens are needed, because the coefficient of determination is often under 0.5. Testing of specimens are necessary after grinding, because this changes the chemical, fatigue and wear properties due to the transformation of the RA bringing about additional compressive residual stresses within the surfaces. ACKNOWLEDGEMENTS The authors would like to thank the German research council (DFG) for sponsoring this work under contracts Fi451/4-3 and Re688/29-3. The 4PB tests have been partly carried out by Mr. Th.Dubreux of I.C.A.M., Toulouse, France during his stay at the University of Essen. In addition we are in debt to G.Stein, Dr.I.Hucklenbroich, and Dr.St.Koch of VSG GmbH, Essen, Germany for providing steel samples. We also would like to thank Prof.Dr.W.Reimers, Hahn-Meitner Institut, Berlin, Germany and Prof.Dr.H.Berns, Ruhr Universitaet, Bochum, Germany for their constant support and steady willingness for discussions. REFERENCES 1. Berns, H., Lueg, J. (1990) Neue Hütte 36, 1, Pp.13-18. 2. Berns, H., Wang, G. (1993) in (Proc.Conf.) Bando, Y., Kosuge, K. (Eds.) Powder Metallurgy World Congress, Kyoto, Japan, Pp.513-516. 3. Berns, H., Escher, C., Streich, W.-D. (1998) Ingenieur-Werkstoffe 7, 3, Pp.36-39. 4. Bohne, C., Pyzalla, A., Reimers, W., Heitkemper, M., Fischer, A. (1998) in (Proc.Conf.) ECLAT ´98, Hannover, Germany, DGM-Informationsgesellschaft mbH, Frankfurt, Germany Pp.183-188 5. Pyzalla, A., Bohne, C., Heitkemper, M., Fischer, A. (2000) in (Proc.Conf.) Progress in Heat Treatment and Surface Engineering, E.J.Mittermeijer, J.Grosch (Eds.) 5th ASM Heat Treatment and Surface Engineering Conference, Gothenburg, Sweden. ASM, Metal Park, Ohio, USA, Pp.299-309 6. Heitkemper, M., Fischer, A., Bohne, C., Pyzalla, A. (2001) in (Proc.Conf.) Wear of Materials 2001, Vancouver, BC, Canada, D.Rigney et al. (Eds.) Elsevier, Amsterdam, The Netherlands, to be published 7. Berns, H., Trohjahn, W., Wicke, D. (1987) HTM 42, 4 Pp.211-216 8. Berns, H., Lueg, J., Trohjahn, W., Wähling, R., Wissell, H. (1987) Powder Met. Int. 19, 4 Pp.22-26 9. Berns, H. (1990) in (Proc.Conf.) 4th Int. Conf. on Fatigue 90, Honolulu, Hawaii, USA Eds. H. Kitagawa, T. Tanaka, Materials and Component Engineering Publications Ltd. Pp. 161 - 166 10. Melander, A. (1990) Int. J. of Fatigue 12, 3 Pp. 154-164 11. Schwalbe, K.H., (1980) Bruchmechanik metallischer Werkstoffe, Hauser, München, Wien Pp.646654 12. Tada, H., Paris P.C., Irwin G.R., (1973) The Stress Analysis of Cracks Handbook, Del Research Corporation, St. Louis, MO, USA 13. Bohne, C., (2000) Mikrostruktur, Eigenspannungszustand und Korrosionsbeständigkeit des kurzzeitlaserwärmebehandelten hochstickstofflegierten Werkzeugstahls X30CrMoN15 1, Diss. TU Berlin, see also Berichte des HMI B572 14. Hauk, V., Nikolin, H.J. (1988) in (Proc.Conf.) ICRS 2, Nancy, France, 23.-25.11. 1988, Edited by G. Beck; S. Denis; A. Simon, Societe Francaise de Metallurgie, Elsevier Applied Science, Pp.895900 15. Ritchie, R.O. (1987) in (Proc.Conf.) 5th Intern. Conf. on Mechanical Behavior of Materials, ICM 5, ASME, The Chinese Society of Metals, Beijing, China, Pp. 285-294

RkJQdWJsaXNoZXIy MjM0NDE=