where B G k 0 0 =− and B A k1 = are constants to be determined. They can be obtained by fitting the experimental data as shown in Fig.6. In Fig. 6, the theoretically predicted curve is presented. It is found that there is a good consistence between test points and theoretical curve. Moreover, since 0 B G0 0 =− < k and 0 B A k1 = > , it is known from equation (8) that there will be a critical electric field E ~ which makes a 0= ∆ and corresponds to the minimum value of the electric field that can make the crack grow. When E E ~ < , a∆ is negative, which means the crack could not propagate. The critical electric field can be obtained as E cE 0.81 ~ ≈ from the theoretical curve presented in Fig. 6, which approximately equals to the experimental result. As shown in Fig. 5, when c E E 0.80 ~ ≈ , the cyclic number reaches four millions. CONCLUSIONS The electric-field-induced fatigue displays distinct characters under different magnitudes of electric loading. When , the emergence and growth of microcracks is the major fatigue mechanism that impeds the macroscopic crack growing. Whereas, when , the macroscopic crack growth is the dominant fatigue mechanism and no microcracks were found in experiments. The crack always propagates in company with the local electric breakdown occurred inside the crack. From the analysis, it is known that the electric field causes the positive energy release rate. The crack growth rate is nonlinearly related to the cyclic electric load. c E E 0.83 < c E 0.83E > REFERENCES 1. Furata A. and Uchino K. (1993) J. Am. Ceram. Soc., 76:1615-1617. 2. Cao H.C., Evans A.G. (1994) J. Am. Ceram. Soc. 77:1783-1786. 3. Lynch C.S, Chen L., Suo Z., and McMeeking R.M., (1995) J. of Intelligent Mater. Sysm. And Struc. 6:191-198. 4. Hill M.D., White G.S., Hwang C.S., Lloyd I.K. (1996) J. Am. Ceram. Soc. 79(7)1915-1920 5. Jiang Q.Y., Cross L.E. (1993) J. Mater. Sci. 28:4536-4543 6. Tai W.P. and Kim S.H. (1996) Mater. Sci. and Engng. B38:182-185 7. Zhu T., Fang F. and Yang W. (1999) J. Mater. Sci. Letters 18:1025-1027. 8. Winzer H., Schneider G.A., Steffens J., Hammer M. and Hoffman M.J. (1999) J. of the European Ceramic Society 19:1333-1337. 9. Zhang J.S., Dong Z.X., Hua X. and Fang D.N., (1999) Proceedings of IMMM’99, the fourth International Symposium on Microstructures and Mechanical Properties of New Engineering Materials, Beijing, International Academic Publishers, pp.121-125. 10. Park S. B. and Sun C. T. (1995) J. Am. Ceram. Soc. 78: 1475-1480. 11. Dwyer O' (1973) The theory of electrical conduction and breakdown in Solid dielectrics, Oxford: Clarendon Press.
RkJQdWJsaXNoZXIy MjM0NDE=