ICF10B

Comparisons with Matrix Ti-alloys SP700 Comparisons of low cycle fatigue lives with matrix metals SP700 are shown in Fig. 5. There is little in-fluence of thermo-mechanical treatments on ultra-low cycle fatigue lives for SP700. It is shown from this figure that strain-controlled low cycle fatigue lives for TMCs are very small as compared with the extra-polation fatigue lives for SP700 shown by the solid line. It is presumed to be resulted from the residual tensile stress in the matrix metal induced during the fabrication process due to the mismatch of thermal expansion between the reinforcement fiber and matrix Ti-alloy. II ○ △ □ Standard specimen( 11FY 12FY) Type- ( 11FY 12FY) Type- ( 11FY 12FY) I ▼ ■ 0.1 1 103 104 105 106 Total strain range t ε % Δ Cycles to Failure Nf Mill Anneal( )+ ST-A( )× ● Figure 5: Comparisons of strain-controlled low cycle fatigue lives with matrix Ti-alloys SP700. Analysis for Reinforcement Fiber Ends Specimen and Fatigue Lives Prediction Fractographic examinations show that many fatigue cracks initiated and propagated even in the non-reinforcement fiber ends laminate layers. These are joined to the main fatigue crack. The fatigue crack propagation life mainly controlled low cycle fatigue life. There is fundamentally little difference in fatigue crack initiation and propagation mechanism between Type-I and -II specimens. 50 1.6 10 Standard Type-I Type-II Matrix metals MMCs Figure 6: Schematics of analytical model A macroscopic stress field of test specimen was analyzed based on a simple analytical model schematically shown in Fig. 6 [10]. These stress analyses show that the MMCs part of Type-I is highly stressed and quail-tatively corresponds to lower fatigue lives of Type-I. There is little difference in stress field of the MMCs part between standard specimen and Type-II. Accordingly, differences in low cycle fatigue lives between standard specimen and Type-II shown in Figs.2 and 3 cannot always rationalized by this macroscopic stress analysis. It is necessary for the future research to model fatigue crack initiation and propagation and consider the redistribution of residual stress for quantitative prediction of low cycle fatigue lives. CONCLUSIONS

RkJQdWJsaXNoZXIy MjM0NDE=