2. Wang, Z., Xu, B., and Cii, Y. (1993). Welding Journal. 72, 397s-402s. 3. Gittos, M. and Gooch, T. (1992). Welding Journal. 71, 461s-472s. 4. Ornath, F., Soudry, J., Weiss, B.Z., and Minkoff, I. (1981). Welding Journal. 60, 227s-231s. 5. Faber, G. and Gooch, T. (1982). Welding in the World. 20, 87-98. 6. Pan, C., Wang, R., Gui, J., and Shi, Y. (1990). Journal of Materials Science. 25, 3281-3285. 7. Pohle, C. (1991) Welding International. 5, 409-413. 8. Zhao, Q., Gao, Y., Devletian, J., McCarthy, J., and Wood, W. (1993). In: International Trends in Welding Science and Technology, pp. 339-343, David, S.A. and Vitek, J.M. (Eds). Gatlinburg, Tennessee. 9. Pan, C. and Zhang, Z. (1994). Materials Characterization 33, 87-92. 10. McPherson, N., Baker, T., and Millar, D. (1998). Metallurgical Transactions A. 29A, 823-832. 11. Kusko, C. (1999). MSc Thesis, Lehigh University, Bethlehem, PA. 12. Kusko, C. (1999). Unpublished research. 13. ASTM E647. (1993). Annual Book of ASTM Standards. Section 3. Metals Test and Analytical Procedures. 3.01, 565-601. TABLE 1 SUBSTRATE AND FILLER METAL COMPOSITIONS Fe Ni Cr Mo Nb Si C P S Al Ti Mn A285 98.31 -- -- -- -- 0.21 0.06 0.01 0.028 -- -- 0.81 309L 60.33 12.62 23.44 -- -- 0.40 0.013 -- -- -- -- -- Figure 1. Martensite layer observed at fusion line of dissimilar metal welds (etchant: 90 ml methanol/ 5 g FeCl/ 4ml HCl, electrolytic preset at 6 volts for 3 seconds). 0 50 100 150 200 250 300 350 400 450 500 0 20 40 60 80 100 120 140 160 180 200 220 240 Distance (mm) Hardness (HK) A285 Substrate 309L Overlay Fusion Line Figure 2. Microhardness results for 309L dissimilar weld (Knoop indenter, 10 g load for 10 seconds).
RkJQdWJsaXNoZXIy MjM0NDE=