ICF10B

amplitudes, exponents of the Wöhler curve and so on). Therefore, the mean directions of the principal stress axes may be described by the weighted mean Euler angles: = ∑ = ∑ = ∑ N N N t t k k t t k k k t t k t W t W t W t W t W t W 1 1 1 ( ) ( ) 1 ˆ ( ) ( ), ˆ 1 ( ) ( ), 1 ˆ ψ ψ θ θ ϕ ϕ (1) where is the summation of the weights, and N is the number of time instants considered. ( ) 1 t k t t W W N = ∑ Three kinds of weight functions are examined in the following: Weight I W (2) 1 ( ) 1 = t k According to such a weight function, each positions of the principal axes influences the mean position of the principal axes to the same degree, irrespective of the stress values. Application of this weight function gives us W = N, and leads to the arithmetic means. Weight II ( ) ( ) ( ) ( )                  ≥ < = t k c af for m c af t k t k c af for t k σ σ σ σ σ σ σ 1 1 1 0 2W (3) where: mσ – exponent of the fatigue curve (σa – Nf) σaf – fatigue limit c – constant This weight function includes only those principal axes positions for which the maximum principal stress σ1(tk) is greater than the product of c and the limit stress σaf; the participation of such positions in averaging exponentially depends on the parameter mσ of the Wöhler curve. Weight III ( ) ( ) ( ) ( ) ( )                                ≥ < = af t k m af t k af t k m af t k t k for for σ σ σ σ σ σ σ σ σ σ 1 1 1 2 1 3W (4) This weight function is similar to the weight function II, but it includes all the principal axes positions and, when σ1(tk) < σaf , the weight function exponent is divided in half. RESULTS OF THE SIMULATION CALCULATIONS The theoretical procedure above is applied to three metallic materials (Table 1). Fatigue test results including the actual position of the fatigue fracture plane are presented in Refs [18,19]. Thus, the position of the vector exp η normal to the actual fracture plane can be compared with the calculated position of the vector cal η , assumed to be coincident with the averaged position of the maximum principal stress axis. In the following, the solid angle α between the X-axis and the vector η ( cal η or exp η ) is considered. The parameter c for the weight function II is assumed to be equal to 0.5. The generated cyclic courses are similar to those of fatigue tests (N = 100 discrete values at wave period T of the sinusoid are applied).

RkJQdWJsaXNoZXIy MjM0NDE=