ICF10B

ORAL REFERENCE NO:ICF100187OR FATIGUE LIFE EXTENSION OF AUSTENITIC STAINLESS STEEL USING NANO-SIZED MARTENSITES FORMED AT INTERSECTIONS OF DISLOCATIONS T. Inamura, M. Shimojo, K. Takashima and Y. Higo Precision and Intelligence Laboratory, Tokyo Institute of Technology 4259 Nagatsuta-cho, Midori-ku, Yokohama, 226-8503, Japan ABSTRACT A new fatigue strengthening method has been proposed. Dislocations are pinned at their intersections by the formation of nano-crystals after cold-work in this strengthening method. High cycle fatigue life of a cold-worked (tensile strain of 10%) 316-type austenitic stainless steel was extended by a cryogenic treatment and this is considered to be due to the pinning of dislocations by the formation of nano-sized α’-martensite particles. This fatigue strengthening did not decrease ductility of the material. This fatigue strengthening method is expected to be applicable for micro-sized materials. KEYWORDS fatigue life extension, dislocation pinning, ductility, nano-sized α’-martensite, micro-sized material INTRODUCTION Micromachines and/or MEMS devices have been intensively developed for the use in information technology, bio-medical technology and so on. The size of the components of these machines will be in the order of microns or sub-microns. Fatigue strength is one of the most important properties in micro-sized materials because the maintenance or the exchange of damaged elements is practically impossible in such tiny machines. Thus, the development of a fatigue strengthening method for micro-sized materials is extremely beneficial. It is necessary to construct a microstructure which is beneficial for the improvement in fatigue life in the order of nanometer, for the strengthening of micro-sized materials. Fatigue of metallic materials is mainly due to the accumulation of irreversible motion of dislocations. An increase in yield stress is, of course, fairly beneficial for fatigue strengthening. However, an increase in yield stress is generally accompanied by a decrease in ductility. We have already

RkJQdWJsaXNoZXIy MjM0NDE=