FATIGUE OF STEEL STRUCTURES P. BROŽ Klokner Institute, Czech Technical University, Šolínova 7, 166 08 Prague 6, Czech Republic The objective of the paper is to report about the main results and conclusions of a new stage of experimental research conducted in Prague on the coupled problem of a many times repeated loss of stability and cumulative damage in the slender webs of steel plate girders subjected to many times repeated loading. In so doing, the paper analyses the experimental data obtained, particularly from the point of view of the initiation and propagation of fatigue cracks in breathing webs, their failure mechanism and relation to the fatigue limit state of the whole girder. Some comments concerning the issues of metal fatigue are added. 1. Introduction Steel bridges, crane runway girders and similar systems are exposed to many times repeated loading and, if their webs are slender, they repeatedly buckle out of their plane. This phenomenon is now usually termed “web breathing” (see eg [1]), and generates pronounced cumulative damage in the webs, so that fatigue cracks usually occur in them. No reliable design procedure for the webs can then be established without the regime of crack initiation and growth in them having been thoroughly mapped. 2. Fatigue damage in thin-walled steel girders The webs of the plate and box girders of steel bridges and like structures are subject to many times repeated loading; consequently, being usually slender, they exhibit many times repeated buckling, this process being now named web breathing. In is in the nature of this phenomenon that considerable cumulative fatigue damage is then generated in the girders, this very substantially affecting the limit state of the girders. Designers of steel structures have for some time been aware of the importance of the breathing process and have been trying hard to incorporate it into design. Two simple approaches have been used to reach this objective: (i) In the first of them, the depth - to – thickness ratio of the web is reduced so that all uncalled-for effects of web breathing may be neglected. (ii) In the other, it is the load acting on the web that is reduced to achieve the some objective. Both of the two aforementioned procedures are useful, but they hold out just part of the solution needed. They represent only a lower bound for this solution; a more economical approach, such as to go beyond this lower bound and to be profitable at least from part of the post-buckled reserve of strength of slender webs, is also very advisable. With the importance of this approach to the breathing phenomenon for reliable and economical design of steel bridges and similar structures, extensive research, both theoretical and experimental, was started in Prague, several years ago, at both the Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences and Klokner Institute. In the theoretical field, three studies are running or have already been closed:
RkJQdWJsaXNoZXIy MjM0NDE=