ICF10B

The pressure distribution and the associated time dependent Stress Intensity Factor (SIF) development in a radial crack configuration with wedge shaped geometry is documented in Figure 3a and in Figure 3b. The abrupt transition in the SIF-diagram up to the static pressure is typical for the fluid front approaching the crack tip. This analysis can be used for a save grouting procedure, to control the pressure according to a given limit of the fracture toughness KIC of the concrete or rock [11]. Figure 3: Radial crack system - wedge shaped geometry a) pressure development b) associated Stress Intensity Factor The influence of the crack environment on the fluid structure interaction process characterised by a variation of the Modulus of Elasticity, both on the pressure distribution, the crack profile and the SIF-development is shown in Figure 4a, Figure 4b and Figure 4c respectively. 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.00 0.05 0.10 0.15 0.20 0.25 0.30 50 s 100 s 250 s 500 s 1000 s 1750 s 3084 s 3086 s 3094 s p [MPa] R [m] 0 1000 2000 3000 4000 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 r 0 = 0.05 m R = 1.50m w0 = 1.0 mm wR = 0.25 mm ka = 0.25 mm E = 0.15E14 MPa KC = 2.50 MPam1/2 mu = 800.00 mPas C = 0.5E-09 1/Pa PPump = 0.30 MPa r f = R KI [M Pa m 1/2] Time [s] b) a) 0.0 0.3 0.6 0.9 1.2 1.5 0.00 0.05 0.10 0.15 0.20 0.25 0.30 r 0 = 0.05 m R = 1.50m w0 = 0.5 mm ka = 0.25 mm E1 = 2.0E4 MPa E2 = 2.0E3 MPa mu = 1000.00 mPas C = 0.5E-09 1/Pa Ppump= 0.30 MPa E1 (500 s) E2 (500 s) E1 (1000 s) E2 (1000 s) p [MPa] R [m] a)

RkJQdWJsaXNoZXIy MjM0NDE=