ORAL REFERENCE: ICF100570OR FRACTAL FRACTURE SURFACES AND FLUID DISPLACEMENT PROCESS IN FRACTURED ROCKS T. Babadagli1 and K. Develi2 1Dept. of Petroleum and Min. Res. Eng., Sultan Qaboos University, Muscat, OMAN 2Dept. of Geological Engineering, Istanbul Technical University, Maslak, Istanbul, TURKEY ABSTRACT This paper deals with the fractal analysis of the surface roughness of rock fractures and the displacement experiments on these types of surfaces using invasion percolation simulations. Data acquired from natural and synthetic origin (developed under indirect tensional stress) fracture surfaces are subjected to fractal analysis applying different methods. Power spectral density method yields considerably lower fractal dimensions than those obtained by variogram analysis for naturally fractured surfaces. It is observed that the two methods yield more consistent fractal dimension values for synthetically fractured rock samples. The systematic difference between the fractal dimensions of horizontal and vertical profiles indicates that the variogram analysis enables us to asses the anisotropic nature of the fractal behavior. Next, invasion percolation simulations on synthetically generated (fractional Brownian motion) representative fractal fracture surfaces are conducted. It is observed that increasing surface roughness, indicated by increasing surface fractal dimension, causes less efficient displacement. Lower fractal dimension of the surfaces yields more compact cluster of injected fluid. KEYWORDS Fractal, fracture surface, invasion percolation, fluid displacement. INTRODUCTION In order to assess the transport characteristics of fractured systems, the roughness of fracture surfaces should be characterized quantitatively. For this purpose, first, a measurement technique for mapping the surface should be employed. Then, a quantitative analysis should be performed. The measurement techniques include photographic, the scattering of energy such as neutron and X-ray, laser profilometry, optical and mechanical methods. Develi et al. [1] provided an extensive review of different methods in comparison with their automated scanning device. Data obtained through these measurement methods can be used in the quantification of roughness. Since Mandelbrot et al. [2] have observed that the fracture surfaces of metals exhibit fractal characteristics, the fractal concept has been applied in rock fracture surface analysis. Self-affine fractal models were found to be suitable to represent natural rock fracture surfaces [3,4,5]. In this study, a brief description of a system designed to quantify the surface topography by measuring the elevations on the fracture surface was presented. Then, the results of fractal analysis of surface data acquired through this device were summarized. Next, invasion percolation 1
RkJQdWJsaXNoZXIy MjM0NDE=