ICF10B

Roughness-length method The profile roughness is measured as the root-mean-square value of the residual on a linear trend fitted to the sample points in a window of length w [7]. Then, the root-mean-square roughness is calculated by RMS w nw mi z j j w z i n i w ( ) ( ) = − ∈ − = ∑ ∑ 1 1 2 1 2 (3) where nw is the total number of windows of length w, mi is the number of points in window wi, zj is the residual on the trend and z is the mean residual in window wi. The fractal dimension can be calculated from D=2- β, where β is the slope of the log-log plot of the RMS(w) function vs. the window length w. Fractal dimensions were obtained using 20 mm window lengths in 32 mm profile (between 10th and 30th points). Like variogram analysis, fractal dimensions of 32 profiles in both horizontal and vertical directions were calculated and averaged. This method was applied to only natural fracture surfaces. Power spectral density analysis The fractal dimension of 2-D data set can be calculated from the slope of a log-log plot of power S(k) vs. wavenumber k. The relationship between the power, S(k), and the wavenumber, k, is given as [3]: S (k) α k - β (4) 3

RkJQdWJsaXNoZXIy MjM0NDE=