ICF10B

δ 1 κ σ f 1δ cfδ f 1σ c d e f Fig. 1. Schematic representation of fibre-bridging stress with pullout displacement. Four cases are studied in this work are shown here and case 4 is for a very strong bond. Cohesive Law for Matrix Cracking The constitutive relationship of the matrix cohesive zone is described by the traction σ and the displacement . It is recognised that the specific work of separation, , reaches a critical value when crack growth commences. In the numerical results of Xu, Bower and Oritz [10], it was found that fibre debonding occurred as the matrix crack reached a fibre. Hence, we assume that the maximum separation across the matrix cohesive zone must equal the fibre pullout displacement δ ∫ Γ = 1 0 0 ( ) 2 δ δ δ σ d 1δ f 1δ corresponding to σ1f as shown in Fig. 1. The shape of the cohesive law is assumed to be a linear function of the separation displacement and is given by: / ) (1 1 1 δ δ σ σ= − so that Γ0=σ1δ1. Finite Element Method Finite element simulations are based on the updated co-ordinate Lagrangian formulation for a dynamic case. For quasi-static cases studied here, the loading rate is assumed to be very small to eliminate the kinetic effect. All physical quantities are functions of a set of moving co-ordinates xi at time t. Fig. 2 shows the schematic diagram of this small-scale bridging problem of a semi-infinite crack in a uniform unidirectional fibre composite. Due to symmetry only a half cracked specimen needs to be considered. The fracture plane is replaced by the cohesive zone with fibre-bridging and matrix separation. The stresses are related to δ by the assumed cohesive laws. Numerical method is implemented by displacement-based finite element method and uniformly distributed fine meshes are placed along the fracture plane to simulate crack growth. The size of these elements is assumed to be the fibre spacing. A linear interpolation procedure is carried out to obtain values of δ at four Gaussian integration points. Then the stress can be obtained from the cohesive law. A fourth order Gaussian integration scheme is used to obtain contribution to the fracture work from the matrix process zone. The fibre bridging force is a force at each node due to the small fibre radius. Its magnitude is determined by the crack-face displacement. The results are obtained for a semicircular region with initial radius = 200 mm. It is chosen such that 0R ∆ 4000 0 = R in which is the size of the smallest mesh element ahead of the crack-tip. ∆ = = ∆ 0.1 1 10 δ δcf is selected to determine the

RkJQdWJsaXNoZXIy MjM0NDE=