Figure 2: Effect of the applied electric field on the critical stress of a line crack CONCLUSIONS The objective of this study is to extend a failure criterion, based on the strain energy density theory, for an elliptical cavity or a line crack embedded in an infinite piezoelectric solid, subjected to a combined in-plane electrical and mechanical loading. This has essentially been accomplished through the consistent application of the strain energy density criterion to a thin layer near the cavity/crack boundary and material element in the interior region of the solid. The total energy density factor, S, depends on the material constants, b, a, polar angle, core region near the apex of the elliptical cavity, and the permittivity of vacuum. The core region on the cavity/crack boundary remains unspecified in size because of different material behavior external to the core region. Unstable crack extension is assumed to occur when some small element just outside the core region has absorbed as much elastic energy as possible and releases it to allow material separation. As discussed above, the location on the free surface of a cavity, at which the surface layer energy is the maximum, may be postulated to be the location where initial failure occurs. Subsequently, the immediate post-failure crack direction may be determined by minimizing the total energy density factor. The results obtained in this study by introducing the exact electric boundary conditions on the cavity/crack boundary are more realistic because it reflects the practical situation. In short, the superiority of the energy density theory has been clearly shown from its capability of adopting the exact boundary conditions. ACKNOWLEDGEMENT Support from the Research Grants Council of the Hong Kong Special Administrative Region, China (Project No. HKU 7122/99E) REFERENCES
RkJQdWJsaXNoZXIy MjM0NDE=