ICF100776PR FRACTURE EVALUATION OF IN-SITU SENSORS FOR HIGH TEMPERATURE APPLICATIONS Scott C. Forth1 and Alexander Staroselsky2 1NASA Langley Research Center, MS 188E, 2 W. Reid St., Hampton, VA 23681 2United Technologies Research Center, MS 129-73, 411 Silver Lane, E. Hartford, CT 06108 ABSTRACT The feasibility of fabricating an in-situ crack sensor for real-time detection of surface cracks propagating in engine components was evaluated using a computational fracture mechanics model. The in-situ sensor system would be required to: (1) be capable of sustaining normal function in a severe environment; (2) transmit a signal if a detected crack in the component was above a predetermined length, but below a critical length that would lead to failure; (3) act neutrally upon the overall performance of the engine system and not interfere with the engine maintenance operations. In this work, fracture mechanics methodologies are used to identify the requirements for an in-situ sensor system that could withstand the engine operating environment, foreign object damage, and minimally degrade engine performance. A computational fracture mechanics model was developed to evaluate the feasibility of fabricating an in-situ crack sensor for real-time damage propagation detection in engine components. KEYWORDS: In-situ sensor, fracture, thin film, engine, high temperature, aircraft safety INTRODUCTION The engine fracture-critical part designation is given to those components with enough energy, due to high rotational speeds and mass, whose failure can have catastrophic consequences. Containment of these potential failures is unrealistic and is not a standard practice due to the excessive weight introduced by a robust containment system would introduce. Therefore, use of a light weight in-situ sensor capable of detecting impending failures will allow timely maintenance actions leading to an increase in overall safety. To implement an in-situ sensor system on an aircraft engine requires several hurdles to be overcome; the operating temperatures of aircraft engines typically exceed 500o C; foreign object damage (FOD) is prevalent in service and manufacturing environments; maintenance actions are driven by safety and cost so the sensor system must not require active attention; and the aircraft engine performance must not be degraded by the inclusion of the sensor, e.g. increased weight or interruption of the gas path.
RkJQdWJsaXNoZXIy MjM0NDE=