ICF10B

POSTER REFERENCE: ICF100507PR FRACTURE PREDICTIONS FOR DUCTILE STEEL G. Pape*, A. Bakker* and M. Janssen* * Delft University of Technology, Laboratory of Materials Science, Rotterdamseweg 137, 2628 AL, Delft, The Netherlands ABSTRACT Ductile failure predictions have been made for several geometries of notched and smooth tensile specimen. Ductile damage has been accounted for in these predictions using a local failure criterion. This criterion, a Rice & Tracey [1] model for the growth of voids in a triaxial stress field gives a prediction of the relative enlargement of an imperfection with initial radius R0. Experimental results have been used to compare with numerical predictions of fracture initiation. Damage has been evaluated in every material location as a continuous distribution of a scalar variable. The model has underestimated local damage in the notched tensile specimen. Introduction of a length parameter in the damage calculation accounts for microstructural effects and an appropriate length scale can be related to inclusion distances in the material. Analysing the physical damage in a smooth tensile specimen prior to failure will reveal early stages of fracture initiation. If failure initiates at macroscopic level (small crack) prior to specimen failure, this would result in a better agreement between numerical predictions of ductile damage and results from experiments. A more critical approach was used using the Rice and Tracey damage model. A comparison have been made for smooth round, smooth square and flat notched specimen. The area reduction at fracture has been compared with numerical predictions. These geometries show unexplained discrepancy between numerical predictions and experimental results. The influence of the strain rate has been taken into account in the numerical simulations by incorporating a strain rate dependent material behaviour derived from experimental data. Only small reductions of the failure strain were calculated using this approach and this compares rather well to experimental results. KEY WORDS Ductile Damage, Local Fracture Criterion, Experiments, Numerical Prediction INTRODUCTION Research for the Royal Netherlands Navy on the vulnerability of warships has resulted in a detailed study on the failure behaviour of explosively loaded panels inside ship structures. This study contains on the one hand a determination of the material response to high strain rate deformation, and on the other hand an investigation of the failure behaviour of the material. This paper is concerned with experimental and numerical failure investigations of the material; also the influence of the strain rate has been taken into

RkJQdWJsaXNoZXIy MjM0NDE=