ICF10B

in which εf is the true fracture strain and A0 and Af the initial and fracture cross sectional area at the notch, respectively. Several strain rates have been applied in the rolling direction of the material (indicated by curves) and the strain rates in the graph were derived using the finite element method. The influence of the rolling direction is remarkably high compared to the strain rate influence and has been tested only at low strain rates for specimen perpendicular to the rolling direction of the plate material (single points). 0 5000 10000 15000 20000 0 0.5 1 1.5 2 2.5 3 3.5 Displacement [mm] Load [N] crack initiation R = 0.45 R = 5 mm R = 1 mm Figure 2: Load – displacement curves for notched specimen in the rolling direction of the plate material at low tensile velocity. Notch radii have been indicated by R. 0.3 0.7 1.1 1.5 1.E-04 1.E-02 1.E+00 1.E+02 Strain rate [-] Fracture strain [-] smooth R=5 mm R=0.45 mm R=1 mm Figure 3: Fracture strains from area reduction for smooth and notched specimen at several strain rates. Strain rates are average values related to area reductions. Standard deviations vary from 0.02 to 0.05.

RkJQdWJsaXNoZXIy MjM0NDE=