13th International Conference on Fracture June 16–21, 2013, Beijing, China -13- Acknowledgements The authors gratefully acknowledge the financial supports from the Natural Sciences and Engineering Research Council (NSERC) of Canada and Ontario Centres of Excellence (OCE). Thanks also go to Hibbit, Karlsson and Sorensen, Inc. for making ABAQUS available under an academic licence to Carleton University. References [1] J.W. Hutchinson, Singular behaviour at the end of a tensile crack in a hardening material. Journal of the Mechanics and Physics of Solids, Vol. 16 (1968) 13–31. [2] J. R. Rice, G.F. Rosengren, Plane strain deformation near a crack tip in a power law hardening material. Journal of the Mechanics and Physics of Solids, Vol. 16 (1968) 1–12. [3] J.R. Rice, A path independent integral and the approximate analysis of strain concentration by notches and cracks. Journal of Applied Mechanics, Vol. 35 (1968) 379–386. [4] C. Betegon, J.W. Hancock, Two parameter characterization of elastic-plastic crack-tip fields. Journal of Applied Mechanics, Vol. 58 (1991) 104–110. [5] A.M. Al-Ani, J.W. Hancock, J-dominance of short cracks in tension and bending. Journal of the Mechanics and Physics of Solids, Vol. 39 (1991) 23–43. [6] Z.Z. Du, J.W. Hancock, The effect of non-singular stress on crack-tip constraint. Journal of the Mechanics and Physics of Solids, Vol. 39 (1991) 555–567. [7] N.P. O’Dowd, C.F. Shih, Family of crack-tip fields characterized by a triaxiality parameter – I. Structure of fields. Journal of the Mechanics and Physics of Solids, Vol. 39 (1991) 989–1015. [8] N.P. O’Dowd, C.F. Shih, Family of crack-tip fields characterized by a triaxiality parameter – II. Fracture applications. Journal of the Mechanics and Physics of Solids, Vol. 40 (1992) 939–963. [9] S. Yang, Higher order asymptotic crack tip fields in a power-law hardening material, Ph.D. Dissertation, University of South Carolina, USA, 1993. [10] S. Yang, Y.J. Chao, M.A. Sutton, Higher-order asymptotic fields in a power-law hardening material. Engineering Fracture Mechanics, Vol. 45 (1993) 1–20. [11] G.P. Nikishkov, An algorithm and a computer program for the three-term asymptotic expansion of elastic-plastic crack tip stress and displacement fields. Engineering Fracture Mechanics, Vol. 50 (1995) 65–83. [12] G.P. Nikishkov, A. Bruckner-Foit, D. Munz, Calculation of the second fracture parameter for finite cracked bodies using a three-term elastic-plastic asymptotic expansion. Engineering Fracture Mechanics, Vol. 52 (1995) 685–701. [13] P. Ding, X. Wang, Solutions of the second elastic-plastic fracture mechanics parameter in test specimens. Engineering Fracture Mechanics, Vol. 77 (2010) 3462-3480. [14] P. Ding, X. Wang, An estimation method for the determination of the second elastic-plastic fracture mechanics parameters. Engineering Fracture Mechanics, Vol. 79 (2012) 295-311. [15] O. Pop, M. Méité, F. Dubois, J. Absi, Identification algorithm for fracture parameters by combining DIC and FEM approaches. International Journal of Fracture, Vol. 170 (2011) 101–114. [16] M. Méité, O. Pop, F. Dubois, J. Absi, Characterization of mixed-mode fracture based on a complementary analysis by means of full-field optical and finite element approaches. International Journal of Fracture, Vol. 180 (2013) 41–52. [17] B. Moran, C.F. Shih, A general treatment of crack tip contour integrals. International Journal of Fracture, Vol. 35 (1987) 295-310. [18] ABAQUS Manual, Version 6.6, Hibbitt, Karlsson & Sorensen, Inc., Pawtucket, RI, 2006. [19] N.P. O’Dowd, O. Kolednik, V.P. Naumenko, Elastic-plastic analysis of biaxially loaded center -cracked plates. International Journal of Solids and Structures, Vol. 36 (1999) 5639-5661. [20] Y.J. Chao, X.K. Zhu, J-A2 characterization of crack-tip fields: Extent of J-A2 dominance and size requirements. International Journal of Fracture, Vol. 89 (1998) 285–307.
RkJQdWJsaXNoZXIy MjM0NDE=