ICF10B

POSTER REFERENCE : ICF100722PR EFFECT OF SURFACE ROUGHNESS ON CORROSION RESPONSE OF STAINLESS STEEL POLISHED BY ELID GRINDING METHOD Jin Nagata 1, Jun Komotori 1, Kazutoshi Katahira 2, Hitoshi Ohmori 2 1 Department of Mechanical Engineering, Keio University, 3-14-1, Hiyoshi, Kohoku-ku, Yokohama 223-8522, Japan 2 The Institute of Physical and Chemical Research (RIKEN) ABSTRACT To clarify the corrosion resistance of a stainless steel having on ELID ground surface, electrochemical corrosion tests were carried out using a three electrode electrochemical cell connected to a computer driven potentiostat. After corrosion tests, morphologies of corroded surface and the corrosion products were analyzed by a Scanning Electron Microscope (SEM) equipped with an Energy Dispersive X ray analyzer (EDX). Excellent smooth surfaces can be achieved by the ELID grinding process when using extremely fine abrasives. The value of surface roughness (Ra) for the ELID ground sample is almost the same as that of the sample polished by using an alumina suspension. The corrosion properties of the ELID ground samples with smooth surface are superior to those of alumina polished specimen. This is attributed to the ELID grinding, producing a very thin and stable oxide layer which displays a superior corrosion resistance compared to that of the alumina polished samples. Consequently, the ELID process appears to offer significant future promise for use in bioimplant and other engineering components subjected to corrosion process. KEYWORDS Surface roughness, Corrosion response, Stainless steel, ELID grinding method 1. INTRODUCTION The ELID (Electrolytic In-Process Dressing) grinding process, which incorporates in-process dressing of metal bonded superabrasive wheels, was applied for efficient and precision grinding of hard materials such as ceramic, optical

RkJQdWJsaXNoZXIy MjM0NDE=