ORAL/POSTER REFERENCE: ICF100428OR EFFECTS OF DYNAMIC STRAIN AGING IN J-R FRACTURE RESISTANCE OF SA516-Gr.70 PIPING STEELS Ji Hyun Yoon, Bong Sang Lee and Jun Hwa Hong Korea Atomic Energy Research Institute, Dukjin-Dong 150, Yusung, Daejon 305-353, Republic of Korea ABSTRACT J-R fracture resistance tests have been performed on two heats of SA516-Gr.70 carbon steels used for the elbows of nuclear piping. The tests covered a wide temperature range of ambient to 500℃ with various loading rates ranging from 0.3 to 1000 mm/min. The steep drops in fracture resistance of the SA516-Gr.70 steels were observed at certain temperature ranges at all loading rates. The temperature for the minimum fracture resistance moved to the higher temperature region as loading rates increase. Tensile tests were also carried out at temperatures of 100 to 316℃ with a range of strain rates of 2.5×10-5 to 1.33×100/s. The serrated flows were observed on some of the stress-strain curves. All these features indicated that the test materials were susceptible to DSA. However, some differences were founded in fracture resistances and DSA sensitivity between the two test materials. From the metallurgical analysis performed on them, it was deduced that microstructural characteristics such as grain size and pearlite fraction made quite a larger gap between the fracture resistance levels of the two materials and that the chemical composition, especially the contents of free interstitial atoms, were a main controlling factor for DSA sensitivity in SA516-Gr.70 steels. KEY WORDS
RkJQdWJsaXNoZXIy MjM0NDE=