POSTER REFERENCE:ICF100513PR EFFECTS OF NOBLE GAS ENVIRONMENTS ON FATIGUE CRACK GROWTH IN TITANIUM ALLOYS M. Shimojo1, R. Kusama1 M. Otsubo1 and Y. Higo1 1 Precision and Intelligence Laboratory, Tokyo Institute of Technology, Yokohama, 226-8503, Japan ABSTRACT The effects of gaseous environments on fatigue crack growth behaviour of metals have been studied by many researchers. However, most of them are limited to the effects of hydrogen and oxygen. It is generally understood that the effects of noble gases such as xenon are negligible as compared to vacuum environments in most metals such as steels. In our previous research we have found that noble gases including helium, argon and xenon do affect the fatigue crack growth behaviour of pure titanium. The noble gases increase the fatigue crack growth rate and change the fracture surface appearance as compared to those tested in vacuum. This peculiar behaviour may be due to the active nature or the hexagonal structure of titanium. In this study, fatigue crack growth tests were carried out on a β-titanium alloy, which has a bcc structure, in noble gas environments. It was found that argon and xenon increased the fatigue crack growth rate of the β-titanium in the Paris regime and changed the fracture surface appearance as compared to those tested in vacuum, however, helium did not. Striations were clearly observed on fracture surfaces of specimens tested in argon and in xenon, while no obvious striations were found on those tested in vacuum and in helium. This may indicate that the observed effects of noble gases are related to both the active nature of titanium and crystal structures. KEYWORDS gaseous environment, noble gas, titanium alloys, fatigue crack growth, fractography INTRODUCTION Gaseous environments generally affect fatigue crack growth behaviour of ductile metals and alloys. It is well recognised that fatigue crack growth rate in air and in oxygen is faster than in vacuum in most metals and alloys [1]. This phenomenon is explained by the adsorption of oxygen on exposed slip steps which are produced upon loading, and this leads to the reduction of reversible slip on unloading [1]. However, the
RkJQdWJsaXNoZXIy MjM0NDE=