ICF10B

ORAL/POSTER REFERENCE: ICF1001039PR EFFECTS OF STATIC STRESS ON ANODIC POLARIZATION BEHAVIOR OF Ti-4.5Al-3V-2Mo-2Fe ALLOY Nobukuni Hyakutake1, Masashi Takagaki1, Jun Komotori1, Atsushi Ogawa2, Kuninori Minakawa3 1 Department of Mechanical Engineering, Keio University, 3-14-1, Hiyoshi, Kohoku-ku, Yokohama 223-8522, Japan 2 NKK Co. Ltd.; 3 NKK America Inc. ABSTRACT Corrosion behavior of implant metals having applied stress must be quantified because these metals are often used under stress in vivo. The aim of the present study is to clarify the effects of static stress on corrosion behavior of Ti-4.5Al-3V-2Mo-2Fe alloy in a simulated physiological environment. An anodic polarization procedure was performed with applied static stresses in Ringer’s solution at 37°C, from a free corrosion potential up to a potential of 4.0 V higher than the free corrosion potential. Then the potential was scanned in the cathodic direction. The specimen surfaces were observed using a Scanning Electron Microscope. We conclude that constant compressive stress up to –800 MPa and tensile stress of below 100 MPa have little effect on corrosion behavior because both of the anodic polarization curves and the features of corroded surfaces were similar to those under zero stress. With applied static tensile stresses of 200 ~ 800 MPa, current density increased suddenly at about 4 V vs. SHE, which is about 1 V higher than the breakdown potential. Before the sudden current density increase, the corrosion reaction seems to be the same as the corrosion reaction under zero stress because the anodic polarization curves and the features of corroded surfaces were similar to those without an applied stress. The observations of corroded surfaces indicate that sudden current density increase at about 4 V vs. SHE is due to great dissolution in a localized area. KEYWORDS Titanium alloy, Biomaterial, Passivity, Corrosion resistance, Corrosion fatigue

RkJQdWJsaXNoZXIy MjM0NDE=