ICF10B

ICF 100134 OR EFFECTS OF T–STRESS AND VOID NUCLEATION ON COHESIVE ZONE MODEL PREDICTIONS FOR DUCTILE FRACTURE Viggo Tvergaard Department of Mechanical Engineering, Solid Mechanics, Technical University of Denmark, DK–2800 Kgs. Lyngby, Denmark ABSTRACT Special interface elements that account for ductile failure by void growth to coalescence are used to analyse crack growth under mode I loading conditions. The tangential stresses inside the interface are determined by requiring compatibility with the surrounding material in the tangential direction. Earlier applications of the model are here extended to consider the effect of a T–stress or effects of void nucleation inside the interface elements. KEYWORDS Cracks, voids, fracture, plasticity. INTRODUCTION For the analysis of crack growth by a ductile failure mechanism the fracture process zone is represented in terms of special interface elements in the crack plane ahead of the crack. The modified Gurson model is used in the interface elements to represent the nucleation and growth of voids to coalescence. In relation to the finite element mesh the initial width of the interface is taken to be zero, but the traction separation relations represented by the interface are based on assuming an interface width of the order of the void spacing. The present interface element formulation is not based on assuming that the plastic strains or the stress state inside the interface are identical to the values of these field quantities in the material adjacent to the interface (as in Tvergaard and Hutchinson [1] or Sigmund and Brocks [2]) . Instead, the present model enforces the continuity of the longitudinal strain along the band, across the band interface. Thus, the stiffnesses of the cohesive zone element give a coupling between the displacement normal to the band and those tangential to the band. Predictions of this cohesive zone model have been presented previously, for growth of pre–existing voids under mode 1 loading conditions (Tvergaard [3]). In the present paper the model is extended to account for the effect of void nucleation inside the interface elements. Furthermore, the model is used to estimate the effect of a T– stress on predicted crack growth resistance curves. DUCTILE FAILURE MODEL FOR INTERFACE In the computations the initial width of the special interface element is taken to be zero, as in other cohesive zone calculations [1]. However, the traction–separation properties of the interface element are calculated based on

RkJQdWJsaXNoZXIy MjM0NDE=