T y 0.75 0.50 0.25 0.0 J J0 a w0 Fig. 3: Crack growth resistance curves for various values of the T–stress, when fI 0.01 , N 0.1 and ro 0 . The effect of void nucleation is not easily accounted for in interface elements or those of [2] , where the dependence on stress triaxiality outside the interface is based on fitting with various cell model studies. However, in the present interface elements nucleation criteria can be specified in the usual manner for Gurson model elements, as the stress and strain fields in the interface elements are fully specified by the conditions of equilibrium and compatibility with neighbouring elements specified above. Nucleation is here taken to be plastic strain controlled, as modelled in terms of (3) by taking 0 and 0 . The dependence of on the effective plastic strain is specified such that nucleation follows a normal distribution [8] , with the volume fraction fN of void nucleating particles, the mean strain for nucleation N , and the corresponding standard deviation s. Fig. 4 shows two examples of crack growth resistance curves predicted with void nucleation in the interface. Both curves use the parameter values fN 0.04 and s 0.1 , so the only difference is that the lower curve has a smaller mean strain for nucleation, N 0.1 , than the value N 0.2 used for the upper curve. It is J Jo fN 0.04 , N 0.2 , s 0.1 fN 0.04 , N 0.1 , s 0.1 a Wo Fig. 4: Crack growth resistance curves for cases with plastic strain controlled nucleation in the interface elements, when fI 0.0 , N 0.1 , ro 0 and T 0 .
RkJQdWJsaXNoZXIy MjM0NDE=