Comparison of Cohesive and Elastic Cracks Figure 4 compares the traction-free zone lengths of Zener-Barenblatt cracks to the crack lengths of elastic Zener cracks. The conclusion is that for the nanocracks considered here (with small crack head opening bT = 4 cr) a significant discrepancy exists between the two predictions. The predicted elastic cracks are significantly longer than the predicted traction-free zones. Also, the discrepancy increases as w and a decrease in magnitude. Dependence of Crack Lengths on Material Figure 4: Comparison of the traction-free zone lengths of Zener-Barenblatt cracks with the lengths of elastic Zener cracks. Elastic Zener cracks: KI = KIC Zener-Barenblatt cracks: v(a + 2c – l2) = cr (rad) a (m) 2c – l1 – l2 or 2c (m) (rad) a (m) 2c – l1 – l2 (m) 2c (m) l1 (m) l2 (m) Figure 3: Dependence of the traction-free zone length, the total crack length, and the lengths of the cohesive zones at the crack head and crack tip on the disclination dipole strength and arm length.
RkJQdWJsaXNoZXIy MjM0NDE=