ICF10B

CONCLUSIONS The numerical characteristics of a fourth order Runge-Kutta scheme used to evaluate the crack shape during fatigue crack growth were presented in this paper. These were first compared against available analytical solutions for the case of a surface cracked plate under tension. Errors were then calculated in the form of a convergence study for a cracked butt-welded plate under tension. Both studies were carried out for a wide range of initial crack depths and shapes. The robustness of the scheme was also investigated with reference to fatigue lives as these were calculated using Gauss integration of a bilinear crack growth law. Motivation for this work was supplied by the need to determine accurately fatigue lives within Monte Carlo simulation of the recently proposed bi-linear crack growth model of BS 7910 [1]. ACKNOWLEDGEMENTS The author would like to thank Professor Chryssanthopoulos for his encouragement and support. This work forms part of a project, which is sponsored by the UK Highways Agency. Their support is gratefully acknowledged. REFERENCES 1. BS 7910 (2000). Guide on methods for assessing the acceptability of flaws in metallic structures. BSI, London. 2. Wu, S.-X. (1985) Eng. Fract. Mech. 22, 897 3. Raju, I.S. and Newman, J.C. (1979) Eng. Fract. Mech. 11, 817. 4. Righiniotis, T.D. and Chryssanthopoulos, M.K. (2001). In: Proc. 8th International Conference on Structural Safety and Reliability. To be presented. APPENDIX For a welded plate, the factor YA is given by A km m Y M M = where Mkm is the magnification factor associated with the weld [1] and Mm is the Newman-Raju plate solution [3].

RkJQdWJsaXNoZXIy MjM0NDE=