ICF100884OR ESTIMATION OF CREEP CRACK GROWTH RATE FROM CIRCULAR NOTCHED SPECIMEN T. Adachi1, A. T. Yokobori, Jr.2, M. Tabuchi3, A. Fuji4 and T. Yokobori5 1Faculty of Science and Engineering, Ishinomaki Senshu University, Japan 2Faculty of Engineering, Tohoku University, Japan 3National Research Institute for Metals, Japan 4Metallurgy Department, Research Institute, Ishikawajima-Harima Heavy Industries Co. Ltd, Japan 5School of Engineering and Science, Teikyo University, Japan. ABSTRACT A circular notched specimen was used to investigate the creep crack growth rate under multi-axial stress condition. A circular notch in a round bar specimen produces multi-axial stress field when uni-axial stress is applied in the axial direction. An electric potential drop method is adopted to measure crack length. In this paper, an equation for the relationship between the electric potential drop and the crack length of circular notch in a round bar is proposed and the accuracy of the measured length of a crack using this method was compared with the actual crack length. Using this equation, high temperature creep crack growth tests were conducted for a circular notched specimen of CrMoV steel. KEYWORDS Circular notch, multi-axial stress, electric potential drop method, creep crack growth, creep fracture life, thermal activated process INTRODUCTION The characteristics of crack growth rate under multi-axial stress condition have been investigated by many researchers using several methods[1-3]. Under the uni-axial tensile stress condition, a round bar specimen with a circular notch produces crack growth data under multi-axial stress condition[4]. We used a circular notched specimen to investigate the creep crack growth rate under multi-axial stress condition. An electric potential drop method was adopted to measure the crack length. The electric potential drop method bases on the fact that the potential distribution in the vicinity of a crack changes with crack growth[5]. A calibration curve is necessary to convert the value of electric potential drop into crack length. An equation which relates crack length to the electric potential has been obtained for CT specimen[5,6]. The equation can be applied to the measurement of a crack length for the center-cracked specimen, a single-edge notched specimen, a CT specimen and others, but it cannot be applied to the circular notched specimen. Therefore, the derivation of a relationship between the value of electric potential drop and the crack length for circular notch for a round bar specimen was conducted. The accuracy of the measured length based on this method was compared with the actual crack length[7]. High temperature creep crack growth tests were conducted for a circular notched specimen of CrMoV steel. The crack length was measured using the proposed equation in this paper and the law of creep crack
RkJQdWJsaXNoZXIy MjM0NDE=