ICF10B

REFERENCE: ICF 10069PR EVOLUTION OF FRACTURE OF STEELS AT A TEMPERATURE OF 4.2 K AND UNDER THE ACTION OF ELECTRIC CURRENT PULSES V.A. Strizhalo and L.S. Novogrudskii Institute for Problems of Strength of the National Ac. Sci. of Ukraine 2 Timiryasevskaya str., Kiev, 01014 Ukraine ABSTRACT The authors studied specific features of the formation of a plastic zone at the crack tip at a temperature of 4.2 K and under the action of electric current pulses (ECP) of high density using steel 03Kh20N16AG6 with a stable austenite as an example. Employing the method of stereofractographic analysis, the results of investigations into specimen fracture surface microrelief, and analytical solutions, they demonstrate the formation of the plastic zone at the crack tip at a temperature of 4.2 K to follow the mechanism of discontinuous yielding. The influence of electric current pulses stimulates the process of the formation of the plastic zone to step up causing the plastic zone to reach its critical size at lower load levels. In the calculation of the stress intensity factor of materials characterized by non-monotonic development of elastoplastic deformation at a temperature of 4.2 K it is recommended to choose the design load PQ by the method of 5% secants. KEYWORDS: fracture, plastic zone, discontinuous yielding, electric current pulses INTRODUCTION The reason for the majority of unexpected fractures of high-stressed elements of structures is various design and manufacturing stress concentrators such as discontinuities, notches, recesses, holes, cracks, etc. The presence of such concentrators in the units of superconducting electromagnetic equipment operating at the temperature above 4.2 K and subject to powerful electromagnetic actions is responsible for significant nonuniformities of both mechanical and electromagnetic stress fields. These nonuniformities may result in the accumulation of energy in local regions of a material, where a crack is most likely to initiate and propagate. A rather strong electromagnetic action may give rise to deformation of the crack profile, which causes either its blunting or healing up, local thermal treatment and hardening through deformation due to electrodynamic loads, stimulation of the crack propagation as a result of the exhaustion of plasticity in the overstressed zone, etc. Electric current pulses passing through the loaded material plasticize it. In so doing at cryogenic temperatures and certain parameters of electric current pulses this plasticization is a consequence of the electron-dislocation interaction and occurs within the period of the electric current pulse action. At the instant the plasticity of the material increases, an abrupt reduction in the metal resistance to

RkJQdWJsaXNoZXIy MjM0NDE=