ICF10098OR Experimental Validation of T* Integral Albert S. Kobayashi* and Satya N. Atluri** *University of Washington, Department of Mechanical Engineering, Seattle, WA 98195-2600, USA ** University of California, Center for Aeronautical Research and Education, Los Angeles, CA 90095-1597, USA T* integral, which includes J integral as a special case, is shown to be a material property suitable for characterizing crack propagation in thin 2024-T3 aluminum sheets. The T* resistance curve, which was generated through stable crack growth tests of single edgenotched (SEN) and central notched (CN) specimens, were used to predict curved crack growth and crack link-up of in-line multiple cracks. T* integral for rapid crack growth reached a maximum value at the terminal crack velocity. Key Words: Ductile fracture, fracture resistance curve, stable and rapid crack growth, curved crack growth. INTRODUCTION The T*ε [1], which is a path dependent integral based on incremental theory of plasticity, circumvents much of the difficulties encountered by the J-integral as shown by Brust et. al. [2]. Recently, the author and his colleagues [3] used experimental, numerical and hybrid experimental/numerical techniques to demonstrate the utility of the T*ε integral in characterizing stable crack growth in thin aluminum fracture specimens. This study was followed by dynamic and curved crack growth and crack coalescence analyses. These results are summarized in the following. T* INTEGRAL The numerical analyses by Brust et. al. [2] showed that the T* integral in the very vicinity of the crack tip reaches a plateau with crack extension under creep and cyclic loading. In contrast, the local J-integral vanishes with crack growth. This local T*, which is designated as T*ε is [1]: Tε * = Wn 1 −ti ∂ui ∂x1 Γε ∫ dΓ (1) where t i is the surface traction on the contour Γε, W is the strain energy density and n1 is the first component of the normal to the curve. Γε is an arbitrary small contour immediately surrounding the crack tip and more importantly it elongates together with crack extension. T*ε, as defined by Equation (1), is identical in form of the J integral and therefore T*ε coincides with J where the deformation theory of plasticity prevails. In terms of incremental theory of plasticity, T*ε integral at the end of the Nth load steps is the sum of ∆T*ε which is the incremental change of T*ε over a load step or
RkJQdWJsaXNoZXIy MjM0NDE=