approximations for mesh independent field discontinuity modeling. Recently a novel method based on finite element approximation as a partition of unity basis was proposed for modeling crack propagation by Belytschko and Black [2], Moes, et al. [3], and Sukumar, et al. [4]. In this method the Heaviside step function is used for local enrichment. Practical implementation of this method involves several steps such as element partitioning and calculation of the cross integrals of the shape functions in the partitioned elements. Care also has to be taken to avoid crack trajectories generating near-zero volume partitions. The method of mesh independent crack modeling by using higher order shape functions proposed below is based on replacing the Heaviside step function with its B-spline approximation. While an arbitrary crack face can be modeled in the limit of increased power of approximation, the implementation involves only standard Gaussian integration over original mesh cells (finite elements). Application of a three-dimensional B-spline approximation to stress analysis in laminated composites, including boundary conditions, implementation issues and asymptotic enrichments in the vicinity of stress singularities, are discussed in Iarve [5-7] and Iarve and Pagano [8]. VARIATIONAL FORMULATION Consider an elastic volume V and a set of piecewise polynomial three-dimensional functions Xi(x), which provide a partition of unity-type basis function for displacement approximation, so that ( ) , ( ) i i i X x U u x ∑ ∈Ω = (1) where Ui are displacement approximation coefficients, not necessarily associated with nodal displacements except for the boundary V∂ where boundary conditions are imposed. All values of index i in equation (1) compose set Ω. Functions Xi(x) are constructed from one-dimensional sets of B-spline basis functions of maximum order n and nodal defect k as standard tensor products. Nodal defect of spline designates maximum number of discontinuous derivatives in this node. If k=1 then ui(x)∈ ; and in the case of k=n-1, one obtains C ( 1) −n C 0 continuous p=n approximation. In our present work a procedure based on polynomial representation (Iarve [5]) was used. Each function Xi(x) possesses local support of no more than (n+1)3 mesh cells and ( ) 1, ≡ ∑ ∈Ω i i X x V∈x . The subdivision into mesh cells or finite elements in Figure 1 is essential for implementation because we assume that there is an integration procedure associated with these cells, which allows us to calculate volume integrals of shape functions, and their cross products and the products of their derivatives. Our goal is to model a displacement field discontinuous along a surface Γα for a given mesh configuration and approximation (1). The step function enrichment of approximation (1) proposed in Belytscko and Black [2] for modeling the desired discontinuity for a bisected domain V can be written as ) ( ~ ( ) ( )) ~ ( ) ( ) (1 ~ ( ) (2) (1) (x) (x) x u x x u x u x α H H f H H = + − = , (2)
RkJQdWJsaXNoZXIy MjM0NDE=