ICF10B

ORAL REFERENCE ICF100944OR EXPLICIT MODELING OF DAMAGE INITIATION AND EVOLUTION IN OPEN-HOLE COMPOSITES E.V. Iarve, 1 D. Mollenhauer2 and R. Kim1 1 University of Dayton Research Institute, 300 College Park Ave., Dayton, OH 45469-0168 2 United States Air Force Research Laboratory, AFRL/MLBC, 2941 P Street Room 243, Wright-Patterson AFB, OH 45433-7750 ABSTRACT The spline approximation approach for three-dimensional stress analysis in laminates containing open holes has been extended to account for matrix cracking in each ply. Crack surface where the displacement jump takes place is defined by using the domain Heaviside function approximated with higher order polynomial B-splines. It is shown that the spline approximation of the Heaviside function maintains the integral properties of the step function and that the gradient of the approximation maintains the integral properties of Dirac’s delta function for any order of approximation. An advantage of the proposed method is that its implementation only involves integration of the products of original shape functions and their derivatives and does not require modification of the integration domains. Uniaxial tension of a unidirectional composite with open hole is considered. Fiber direction stress relaxation due to longitudinal splitting is successfully modeled by the method proposed. Observed by using incremental x-ray technique split origination and extension loads correlate well with predictions. INTRODUCTION Development of a high fidelity strength prediction tool for laminated composites with stress concentrations is an important problem for the aerospace industry as well as for less traditional areas of composite applications, such as rail-transportation and sports equipment industries. High fidelity modeling involves simulation of actual damage mechanisms such as matrix cracking, delaminations and their combined influence on the redistribution of fiber stresses, which determines the strength. Discrete modeling of transverse cracking represents a formidable problem. Normally the mesh configuration is dictated by the boundaries of the specimen, such as the presence of a hole. Transverse cracking directions in the plies are defined by fiber orientations and change from ply to ply. Higher order shape functions will be employed below to construct an efficient method for mesh independent discontinuity modeling. The concept of partition of unity approximation by Babuska and Melenk [1], which encompasses the moving least square approximation approach, provides a powerful tool for building higher order

RkJQdWJsaXNoZXIy MjM0NDE=