POSTER REFERENCE: ICF100644PR FATIGUE BEHAVIOR OF A MICRO-SIZED AUSTENITIC STAINLESS STEEL WITH FINE GRAINS G. P. Zhang1,2, K. Takashima1, M. Shimojo1 and Y. Higo1 1 Precision and Intelligence Laboratory, Tokyo Institute of Technology 4259 Nagatsuta-cho, Midori-ku, Yokohama, 226-8503, Japan 2 State Key Laboratory for Fatigue and Fracture of Materials, Institute of Metal Research Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110015, P. R. China ABSTRACT A fine-grained (about 1-3 µm in diameter) austenitic stainless steel thin film was selected. Micro-cantilever beam type specimens were fabricated by focused ion beam (FIB) machining. The dynamic bending tests of the microbeams were carried out under constant load amplitude control. The cyclic strain hardening behavior was found in the material under two cyclic load amplitudes, ∆P=40 and 47 mN. At ∆P=47 mN, the significant intrusions formed on the sample surface due to the development of cyclic strain localization and provided the preferential site of microcrack initiation. Mode I fatigue crack propagation occurred in the fine-grained material by a transgranular mode. The dislocation microstructures of the fatigued micromaterial were investigated by TEM. The mechanism of fatigue damage in the material was discussed. KEYWORDS Micro-sized material, Austenitic stainless steel, Fine grain, Fatigue INTRODUCTION Great research interests on the measurement of Young’s modulus, yield and fracture strength of all kinds of
RkJQdWJsaXNoZXIy MjM0NDE=