ICF10B

Reference No: ICF100434OR FATIGUE CRACK GROWTH ACCELERATION EFFECTS UNDER HELICOPTER LOADING SPECTRA V.Zitounis1, P.E.Irving1, R.Cook2, S.Jenkins3, D.Matthew3 1 School of Industrial and Manufacturing Science, Cranfield University, Bedfordshire, MK43 0AL, UK 2 Deceased; Formerly, MSS, DERA, Farnborough, GU14 6TD, UK 3 GKN-WHL, Yeovil, Somerset, BA20 2YB UK ABSTRACT Fatigue crack growth tests have been performed under constant and variable amplitude loading spectra on pre cracked CT specimens of titanium alloy Ti-10V-2Fe-3Al. The variable amplitude spectra were simplified versions of those previously measured on a helicopter rotorhead. They consisted of constant amplitude loading at R values of 0.7 and 0.9, interspersed with excursions to zero load or intermediate tension loads. The number of underload cycles and their frequency were systematically varied, and the resulting growth rate increment produced by 106 cycles of the sequence was accurately measured. The starting ∆K of the high R cycles was at the constant amplitude threshold, ∆Kth. It was found that crack growth rates and crack growth increments were accelerated by factors between 1.6 and 2.7 with respect to calculated linear summations of crack growth made using constant amplitude crack growth data. This is a non conservative effect. The results are discussed with respect to previous work on load interaction models. KEYWORDS Fatigue, crack growth, load spectra, acceleration, underloads INTRODUCTION Damage tolerance design philosophy, based on fatigue crack growth, is well established and applied in fixed wing aircraft. In contrast, helicopter components have been traditionally designed using safe life approaches. Damage tolerant design of helicopters requires data and understanding of how fatigue cracks develop in helicopter materials under helicopter load spectra. The application of damage tolerance analysis to helicopters presents difficulties. Marquet and Struzik [1] provide a good summary. Two problems are a) lack of understanding of fatigue crack growth in the near-threshold region and b) lack of understanding of load interaction effects under helicopter load sequences. In particular, the effect of the ground-air-ground cycles on fatigue crack growth is not well documented [2]. The load spectra of many helicopter components consists of large numbers of load cycles at high R ratio (R>0.75). The rest of the spectrum consists of load cycles at R ratios between 0.4 and 0.7, with excursions to zero load. In cracked components, stress intensity ranges (∆K) would be close to the threshold, ∆Kth. Prediction of fatigue crack growth rates requires an understanding of load interaction effects under these spectra.

RkJQdWJsaXNoZXIy MjM0NDE=