Accompanying transient increases in fatigue crack growth rates at R = 0.8 were found. It may be that the present results, although confined to tensile underloads, have their origin in a similar mechanism. Further work is in progress to identify the mechanism responsible and to develop adequate predictive models for fatigue crack growth under these conditions. Figure 5: Variation of the acceleration factor γ with a) the total crack increment and b) Fraction of the underloads applied in each sequence of load. b a Conclusions (1) Fatigue crack growth rate testing under variable amplitude load sequences containing tensile underloads produces crack acceleration relative to a non interaction linear summation of constant amplitude crack growth rates. (2) The acceleration relative to linear models is between 1.6 to 2.6, depending on the spectrum details. Acknowledgements This work was sponsored by the UK Civil Aviation Authority. Their financial support is gratefully acknowledged. REFERENCES 1. Marquet, T., Struzik, A., (1998). Damage tolerance applied to metallic components, 24th European Rotorcraft Forum, Marseilles, France. 2. Irving, P.E., Buller, R. G., (1999). In: Fatigue and Fracture Mechanics 29th vol ASTM STP 1332, pp 727-742, Panontin, T.L., Sheppard. S.D. (Eds). American Society of Testing and Materials, USA 3. Kumai, S., Higo, Y. (1996). Materials Science and Engineering A221, 154 4 Sadananda, K., Vasudevan, A. K., Holtz, R. L., Lee, E. U, (1999). Int. J. Fatigue 21, 23 5. Fleck, N. A., (1985). Acta Metall. Vol33, No 7, 1339 6 Buller, R.G., Jenkins, S., (1998). Final report WP320-Material Data and component tests on WHMS 640 (Ti-10V-2Fe–3Al), GKN Westland Helicopters, LR97,182 DTI-LINK RA/6/30/06 7. Wei, R. P., Brazil, R. L., (1981). In: Fatigue Crack Growth Measurement and Data Analysis ASTM STP 738, pp. 103-119, S.J. Hudak, Jr. and R. J. Bucci (Eds), American Society of Testing and Material, USA 8. Harter, James A., (2000) AFGROW Users manual, Version 4.0001.11.8, Technical Memorandum, AFRL-VA-WP-TR-2000-XXXX, AFWAL Flight Dynamics Laboratory, Wright-Patterson AFB, OH. 9. Dabayeh, A.A., Topper, T.H., (1995). Int. J. Fatigue 17, 261 10. Hackyard, M., Powell, B.E., Stephenson, J.M., McEIhome, M., (1999). Int. J. Fatigue 21, S59
RkJQdWJsaXNoZXIy MjM0NDE=