higher than those at 0.3 and 0.5. The fatigue crack was extended by both cyclic and static loading and this causes higher fatigue crack growth rate at a stress ratio of 0.7. The results obtained in this investigation are the first measurements of fatigue crack growth properties for micro-sized specimens and provide basic guidelines for design of actual micro-sized machine and MEMS devices. Acknowledgement This work was partly supported by the Grant-in-Aid for Scientific Research (B) (2) No. 12555186 from the Ministry of Education, Science, Sports and Culture, Japan. The authors would like to thank to Mr. S. Maekawa for his help in experiments. REFERENCES 1. Read, D. T. and Dally, W. (1995) J. Electronic Packaging, 117, 1. 2. Muhlstein, C. L. and Brown, S. (1998). In: Tribology Issues and Opportunities in MEMS, pp. 529-538, Bhusan, B., Klewer Academic Publications, Dordrecht. 3. Schwaiger, R. and Kraft, O. (1999) Scripta Mater., 41, 823. 4 Takashima, K., Kimura, T., Shimojo, M., Higo, Y., Sugiura, S. and Swain, M. V. (1999). In: Fatigue ’99 (Proc. 7th Int. Fatigue Cong.), pp. 1871-1876, Wu, X-R. and Wang, Z-G., (Eds). Higher Education Press, Beijing. 5. Higo, Y., Takashima, K., Shimojo, M., Sugiura, S., Pfister, B. and Swain, M. V. (2000). In: Materials Science of Microelectromechanical Systems (MEMS) Devices II, pp. 241-246, deBoer, M. P., Heuer, A. H., Jacobs, S. J. and Peeters, E., (Eds). The Materials Research Society, Pennsylvania. 6. Maekawa, S., Takashima, K., Shimojo, M., Higo, Y., Sugiura, S., Pfister, B. and Swain, M. V. (1999) Jpn. J. Appl. Phys., 38, 7194. 7. Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. and Swain, M. V. (2000). In: Materials Science of Microelectromechanical Systems (MEMS) Devices II, pp. 247-252, deBoer, M. P., Heuer, A. H., Jacobs, S. J. and Peeters, E., (Eds). The Materials Research Society, Pennsylvania. 8. Okamura, H. (1976). Introduction to Linear Fracture Mechanics, Baifukan, Tokyo, (in Japanese). 9. Ichikawa, Y., Maekawa, S., Takashima, K., Shimojo, M., Higo, Y. and Swain, M. V. (2000). In: Materials Science of Microelectromechanical Systems (MEMS) Devices II, pp. 273-278, deBoer, M. P., Heuer, A. H., Jacobs, S. J. and Peeters, E., (Eds). The Materials Research Society, Pennsylvania. 10. Suresh, S. (1991), Fatigue of Materials, Cambridge University Press, Cambridge.
RkJQdWJsaXNoZXIy MjM0NDE=