ICF10B

the macroscopic crack, which can reduce the occurrence of microcracks as well. In Fig. 8, the curves between the loading numbers and the length of crack growth are presented. Note that although the crack growth rate varies significantly, they still almost are stable. The difference among the cyclic life corresponding to different amplitudes of the cyclic electric field can be considerably large. Fig.9 reveals the relationship between the electric loading and the crack growth rate. Although the logarithmic coordinate system is used, a nonlinear power relation between the electric field and the crack growth rate is obvious. A THEORETICAL ANALYSIS OF THE CRACK GROWTH RATE Fig. 7 shows the schematic of the proposed model. A voltage is applied on the upper and lower surfaces of the specimen. Consider the energy release rate between two regions (region I and region II), as shown in Fig. 7. The region I denotes the region far behind the crack tip while the region II denotes the region far ahead of the crack tip. Since the region I and the region II are far from the crack tip, the mechanical and electrical fields are uniform in them. Note that the energy release rate for crack growth is the difference of the unit length energy between the region I and the region II. The voltage at the upper surface of the specimen is V and the voltage at the upper crack surface in region I is V . The height of the specimen is 2H and the distance between crack surfaces in region I is 2h. The permittivities of the specimen and the medium inside the crack are 2 1 mε and cε , respectively. Next, in order to calculate the energy of the region I and the region II, we define and as the electric displacements of the region I and the region II, respectively. Because the electric displacement vector in the region I or in the region II is perpendicular to the middle surface, only one component of the electric displacement vector is not zero and written as or . and can be calculated in the specimen subjected to an electric field as follows 1D 2D 1D 2D 1D 2D V1 V2 I c V=0 I I ε mε Fig. 7: Schematic of the analysis model ( ) h H h V D c m 2 c m 1 + − − = ε ε ε ε , m 2 2 H V D ε − = (1) In order to calculate the total energy of unit length, the internal energy needs to be calculated at first. The internal energy of the region I and the region II is (H h) h V V D c m c m 2 2 2 1 1 + − =− = ε ε ε ε U , H V V D m 2 2 2 2 2 ε =− = U (2) The external force potentials of the region I and the region II are , 2 1 1F 2V D = 2 2 2F 2V D = (3)

RkJQdWJsaXNoZXIy MjM0NDE=