Advanced Photon Source was supported by the U.S. Department of Energy, Basic Energy Sciences, Office of Science, under Contract No. W-31-109-Eng-38. REFERENCES 1. Underwood, J.H, Pook, L.P. and Sharples, J.K. (1977) ASTM STP 631, 402. 2. Underwood, J.H. (1995) Exp. Mech. 35, 61. 3. Elber W., (1971) ASTM STP 486, 230. 4. Nelson, D.V. (1982) ASTM STP 776, 172. 5. Parker, A.P. (1982) ASTM STP 776, 13. 6. Walker, K. (1970) ASTM STP 462, 1. 7. Saxena, A., Hudak, S.J. Jr., and Jouris, G.M. (1979) Eng. Fract. Mech., 12, 103. 8. Miller, M.S. and Gallagher, J.P. (1981) ASTM STP 738, 205. 9. Wu, X.R. (1984) Eng. Fract. Mech., 20, 35. 10. Wu, X.R. and Carlsson, A.J. (1991) Weight Functions and Stress Intensity Factor Solutions, Pergamon Press, Oxford. 11. Fett, T. and Munz, D. (1997) Stress Intensity Factors and Weight Functions, Computational mechanics publications, Southampton. 12. Stacey, A. and Webster, G.A. (1988) ASTM STP 1004, 37. 13. Nguyen, N. and Wahab, M.A. (1996) Welding Journal, 75, 55s. 14. Itoh, Y.Z. (1989) Eng. Fract. Mech., 33, 397. 15. Okamoto, A. and Nakamura, H. (1990) J. Pressure Vessel Tech., 112, 199. 16. Glinka, G. (1979) ASTM STP 677, 198. 17. Glinka, G. (1987) Advances in Surface Treatments: Technology-Applications-Effects, Pergamon, 413. 18. Todoroki, A. and Kobayashi, H. (1988) Trans. Japan Soc. Mech. Eng., A-54 30. 19. Todoroki, A. and Kobayashi, H. (1990) Proceeding of the LSME/JSME Joint Conference, Seoul, Korea, 367. 20. ASTM Standards, ASTM E 647-95a. 21. Almer, J.D., Cohen, J.B., and Winholtz, R.A. (1998) Metall. and Matls. Trans, 29A, 2127. 22. MTS Systems Corporation (1993) ‘759.40 Testware fatigue crack growth test operator’s guide’, MTS System Corporation. 23. Almer, J.D., Cohen, J.B., McCallum, K.R., and Winholtz, R.A. (1997) Proc. of the Fifth International Conference on Residual Stress, Soc. Exp. Mech., Bethel, CT, 1072. 24. Dugdale, D.S. (1960) J. of Mech. and Phys. of Solids, 8, 100. 25. Birol, Y. (1988) J. of Mater. Sci, 23, 2079. 26. Irwin, G.R. (1960) Proc. of Seventh Sagamore Ordnance Materials Conference, Syracuse University, IV 63. 27. Rice, J.R. (1972) Int. J. Solids Structures, 8, 751. 28. Bathias, C. and Pelloux, R.M. (1973) Metall. Trans., 4, 1265.
RkJQdWJsaXNoZXIy MjM0NDE=