ICF10B

ORAL/POSTER REFESENCE:233PR Fatigue Crack Initiation (FCI) Life Prediction for a Flat Plate with a Central Hole Tso-Liang Teng1, Cho-Chung Liang2, Peng-Hsiang Chang3 1,2Department of Mechanical Engineering, Da-Yeh University 3University of National Defense Chung Cheng Institute of Technology ABSTRACT This work constructs an effective procedure that combines the finite element and strain-life methods in order to accurately predict fatigue crack initiation (FCI) life and then establish an estimated schedule of fatigue life. The proposed method is applied to a flat plate with a central hole to obtain predicted lives. Comparing the results from the proposed method is compared with those of Juvinall’s stress-life method, Socie’s local strain method and Bannantine’s summary experimental data. Comparative results demonstrate that the fatigue life estimated by the novel procedure closely approximates the experimental results. Keywords:Notch, stress concentration, finite element method, crack initiation life. 1. Introduction Fatigue life prediction for notched members may be approached from several viewpoints. For crack initiation, many researchers have supplemented the traditional approach, which is based on nominal stresses and stress concentration factors. Peterson [1] initially used elastic stress concentration factors and nominal stresses to estimate the fatigue lifetime of notched members, but the later studies [2-4] used the Neuber’s rule [5,6], which uses the relations between nominal stresses and strains to estimate the fatigue life of the material at the notch root. The above analyses assumed the crack propagation part of fatigue life to be extremely small. Meanwhile, Socie [7] used local stress-strain concepts and a cumulative-damage approach to predict fatigue-crack initiation in engineering structures subjected to random loading, and Newport et al. [8] used Neuber’s rule and the equivalent strain-energy density method to predict fatigue-crack-initiation life. Furthermore, Costa [9] predicted fatigue crack initiation life for notched bend specimens with two different notch acuities and two stress ratios using the equivalent strain energy density method, while Giglio and Vergani [10] employed total strain energy

RkJQdWJsaXNoZXIy MjM0NDE=