ICF10B

density numerically determined through elastic-plastic analysis to predict fatigue life. Yip et al. [11] investigated multi-axial fatigue crack initiation lives for solid cylindrical specimens with transverse circular holes. This work constructs an effective procedure by combining the finite element and strain-life methods to predict fatigue crack initiation (FCI) life and then establishing an estimated fatigue life schedule. The proposed procedure can obtain the complete distribution of structural strains and strain-time history at the notch by using the finite element method, and can also obtain the fatigue life at any location in the structure by smooth specimens fatigue resistance. Additionally, this investigation considers interaction between loads, and Miner’s rule can be used to calculate the cumulative damage in the FCI phase. The proposed procedure is then applied to a flat plate with a central hole, and the results compared with those of Juvinall’s stress-life method, Socie’s [7] local strain method, and Bannantine’s summary experimental [13] data. Comparative results demonstrate that the fatigue life estimated by the novel procedure closely approximates experimental results. 2. Fatigue-analysis Procedure The life prediction procedure involves two parts, as illustrated in Fig. 1. The structural analysis involves the stresses and strains calculated in a highly stressed area where slip concentrates from the input loads for a given material and geometry. The stresses and strains of critical areas are transformed into fatigue damage, and integrating the damage subjected to an empirical failure criterion produces a prediction for structural life. In the structural analysis, the strains and stresses can be calculated at each time increment using a finite element method in which loading history is the input of the structural model. The service stress-strain field in these critical areas within the components can also be found by using the finite element method. The structural analysis assumed that the material followed the Von Mises yield criterion and the associated flow rules. 3. Analytical Model To assess whether the use of the more accurate present calculation procedure improves fatigue-life prediction, predictions made with Juvinall’s stress-life method, Socie’s [7] local strain method and the method presented herein are compared with experimental results taken from Bannantine[13]. 3.1 Specimen and material properties The material used herein is medium strength steel [13], The length, width and thickness of the plate are assumed to be 1.00in, 10in and 0.30in, respectively, while the diameter of the central circle is 0.50in.

RkJQdWJsaXNoZXIy MjM0NDE=