CONCLUSIONS Some experimental data related to one steel, 18G2A, and two cast irons, GGG40 and GTS45, under multiaxial high-cycle fatigue have been compared with the theoretical results of the expected principal stress directions. For the three materials examined, the fatigue fracture plane position is about perpendicular to the weighted mean direction of the maximum principal stress. Such a direction is determined by averaging the instantaneous positions of the principal stress axes through suitable weight functions. For each time instant, the most appropriate weight functions take into account whether or not the maximum principal stress is greater than a certain level dependent on the fatigue limit. Furthermore, such weight functions are influenced by the value of the Wöhler curve exponent. REFERENCES 1. Stanfield, G. (1935) Discussion of „The strength of metals under combined alternating stresses”, by H.Gough and H.Pollard. Proc. Inst. of Mechanical Engineers, Vol.131, p.93. 2. Brown, M.W. and Miller, K.J. (1973) A theory for fatigue failure under multiaxial stress-strain conditions, Proc. Inst. Mech. Engrs. 187 65/73, pp. 745-755. 3. Brown, M.W. and Miller, K.J. (1979) Fatigue Engng Mater. Struct. 1, 231-246. 4. Fatemi, A. and Socie, D.F. (1988) Fatigue Engng Mater. Struct. 11, 149-165 5. Lachowicz, C.T. and Macha, E. (1990) Mat.-wiss. u. Werkstofftech. 21, 450-458. 6. Socie D. (1993) Critical plane approaches for multiaxial fatigue damage assessement. In: Advances in Multiaxial Fatigue, ASTM STP 1191, pp. 7-36, McDowell D.L. and Ellis R. (Eds), American Society for Testing and Materials, Philadelphia. 7. Papadopoulos I. V. (1998) Fatigue Fract. Engng Mater. Struct. 21, 269-285. 8. Macha, E. and Sonsino, C.M. (1999) Fatigue Fract. Engng. Mater. Struct. 22, 1053-1070. 9. Carpinteri, A. and Spagnoli, A. (2001) Int. J. of Fatigue 23, 135-145. 10. McDiarmid, D.L. (1985) Fatigue under out-of-phase biaxial stresses of different frequencies. Multiaxial Fatigue, ASTM STP 853, pp. 606-621, Miller K.J. and Brown M.W. (Eds), American Society for Testing and Materials, Philadelphia. 11. Kanazawa, K., Miller, K.J. and Brown, M.W. (1977) Journal of Engng Mater. Technology, 222-228 12. Findley, W.N. (1959) Journal of Engineering Industry, 302-306 13. Stulen, F.B. and Cummings, H.N. (1954) A failure criterion for multiaxial fatigue stresses. Proc. ASTM, Vol. 54, pp. 822-835. 14. Macha, E. (1989) Mat.-wiss. u. Werkstofftech. 20, 132-136 and 153-163. 15. Carpinteri, A., Macha E., Brighenti R. and Spagnoli A. (1999) Int. J. Fatigue 21, 83-88. 16. Carpinteri, A., Brighenti, R., Macha, E. and Spagnoli, A. (1999) Int. J. Fatigue 21, 89-96. 17. Carpinteri, A., Brighenti, R. and Spagnoli, A. (2000) Fatigue Fract. Engng Mater. Struct. 23, 355364. 18. Neugebauer, J. (1986) Fatigue strength of cast iron materials under multiaxial stresses of different frequencies, Report FB-175 Fraunhofer Institute fur Betriebsfestigkeit (LBF), Darmstadt. 19. Pawliczek, R. (2000) Fatigue fracture plane orientation under combined bending and torsion for 18G2A steel, Report No 1/2000, Technical University of Opole, Faculty of Mechanical Engineering, Opole, Poland, pp. 1-17 (in Polish). 20. Korn G.,A. and Korn T.,M. (1968) Mathematical Handbook. 2nd ed. New York: McGraw-Hill Book Company. The paper realized within the research project 7 T07B 018 18, partly financed by the Polish State Research Committee in 2000-2002.
RkJQdWJsaXNoZXIy MjM0NDE=