ICF10B

ORAL REFERENCE: ICF100124OR FATIGUE LIFE CALCULATION OF FILLET-ROLLED COMPONENTS AT AXIAL CYCLIC LOADING C. Richter, T. Seeger Fachgebiet Werkstoffmechanik Darmstadt University of Technology, Germany ABSTRACT Fillet rolling is a mechanical surface strengthening method. Residual compressive stresses induced in the surface layer of a component are able to increase significantly the fatigue limit and the fatigue life. It is known that the residual stresses cannot prevent crack initiation in fillet-rolled notched areas at load levels lower than the fatigue limit. However, in the crack propagation phase the main working principle of fillet rolling occurs. After crack initiation the residual compressive stresses retard or prevent further crack propagation. Hence the calculation of the fatigue limit and the fatigue life is possible by means of fracture mechanics. To account for plasticity effects an elastic-plastic crack growth model based on the effective Jintegral is formulated. It can be applied at all phases of the fatigue process by combining the description of crack propagation with methods of the local strain approach. Particular attention has to be drawn to the crack closure phenomenon to describe the positive effect of residual stresses. A new method is presented to calculate the crack opening load-level in notched areas with residual stresses considering notch plasticity effects. The crack growth model and its modules are verified by experiments. The model can be applied in the case of constant and variable amplitude loading to calculate the fatigue limit and the life until fracture (fracture fatigue life) or crack growth stop. KEYWORDS: fatigue life prediction, fatigue crack growth, fillet rolling, residual stresses, crack closure, J-integral, local strain approach, variable amplitude loading INTRODUCION Fillet rolling is a mechanical surface strengthening method. It is used with success particularly in the case of notched structural parts which are symmetric in respect to rotation. During the fillet rolling process a profiled roller is pushed around the notched component in a rolling motion bearing a constant pressure load. Plastic deformation of the surface area and the elastic reaction of the core lead to residual compressive stresses in the surface area while residual tensile stresses act on the core. The fatigue life of notched components is usually subdivided into crack initiation and crack propagation phases. In fillet-rolled components the fracture fatigue life is mainly determined by the latter due to the effect of the residual stresses. Figure 1 demonstrates the special fatigue behaviour of fillet-rolled components for constant and variable amplitude loading. In comparison to the non-rolled component the crack initiation loadlevel can be increased by about 15% in the case of constant amplitude loading. In addition to the surface improvement the residual stresses reduce the local loading of the notch root by shifting the local stress-strainpath in the compressive region. But the changes in mean stress in the notch root cannot explain the high

RkJQdWJsaXNoZXIy MjM0NDE=