ICF10B

V – Conclusion For the studied steel, the stress redistribution at the notch root has been shown to be mainly managed by the isotropic hardening variable describing the cyclic softening. Thus, a simple method is proposed, knowing the parameters t p m K K K, , (F.E. calculations) and uE f E u f ands s s s, , 0 0 (experimental data), to deduce from the global diagram (smooth or notched specimen) the local Haigh’s diagram at the notched root. In this case, the cycles are elastic. When the cycles are plastic with 0 = moyE s , the integration of the behaviour rules for the stabilized cycle following by the post-processing calculations of the failure rules allow us toestimate NR. However, if 0 ¹ moyE s , the local mean stress is fully relaxed, the amplitude of the cycle starts to decrease and then increases because of the local ratchet strain. In this case, it is more difficult to estimate precisely NR if the local ratchet rate is not precisely known. Acknowledgments : This study has been supported by the society FORMER-DELLE-90101.France.Cedex References: {1} - CHABOCHE J.L. Rev. Fr. Mec., n°9, 1974, 50. {2} - CHAUDONNERET M. , J. Eng. Mat. Techn., Vol 115, 1993, 373-379 {3} - DUVAL A., ROBINET P., TRIVAUDEY F., DELOBELLE P., Rapport 7, contrat FORMER/LMARC, 1999 Fig.5 : Monotonic stress-strain curves for smooth and notched specimen. Experiments and modelling. Fig.6 : Woehler’s curves for smooth and notched specimens ( 0 = moy s ). Experiments and F.E. calculations.

RkJQdWJsaXNoZXIy MjM0NDE=