”Fatigue Reliability Evaluation and Fracture Analysis at Elevated Temperature related to Safety Guarantee of Industrial Use Pt Alloy” Soichi HITOMI*, Hideto SUZUKI**, Masashi NAKAMURA** * Tanaka Kikinzoku Kogyo K.K. Isehara Works , 26, suzukawa , Isehara-city, Kanagawa, 259-1146 JAPAN ** Department of Engineering, Faculty of Engineering, Ibaraki University , 4-12-1, Nakanarusawa, Hitachi-City, Ibaraki, 316-8511 JAPAN ABSTRACT Platinum and its alloys are widely used in the glass-melting industry because of their high melting point, high resistance to oxidation and inertness with molten glass. Since they are usually used above 1273K, it is important to improve their mechanical properties at high temperatures above 1273K. Alloying with rhodium is known as a conventional method to increase the strength of platinum. For the further improvement of high temperature properties, it is essentially important to clarify the basic mechanical properties of platinum and its alloys at elevated temperatures. In this study, fatigue reliability at elevated temperature of platinum and its alloys were examined by the elucidation of fracture mechanism. Main results were follows ; (1)S-N characteristics of PtRh alloys were almost arranged in the straight line. (2) From the fractography using SEM, it was indicated that fatigue fracture mechanism was similar to the static destruction in the high stress side, on the other hand, that was effected by creep in the low stress side. KEYWORDS Fatigue fracture, Fractography, Platinum, High temperature, Creep INTRODUCTION Platinum is one of the precious metals which are representative as well as the gold. Platinum is used as not only decorative material but also industrial material. Platinum and its alloys are widely used in the glass melting industry because of their high melting point, high resistance to oxidation and inertness with molten glass. Therefore, platinum and its alloys are indispensable to the manufacturing of the high-grade glass. Equipments used for glass melting generally be broken by creep rupture mechanism because it usually last for long time under high temperatures. Especially, the thermal fatigue by rapid temperature change occurs at temperatures higher than 1273K when raw materials are fed into the glass-melting crucible. However, the report on high temperature creep property and fatigue characteristics of platinum and its alloys are little still. Therefore, it is very important to grasp fracture characteristics of platinum and its alloys. In this study, high temperature fatigue reliability of platinum alloy was demonstratively examined including the elucidation of fracture mechanism. EXPERIMENTALPROCEDURE The materials used for the test are industrial grade purity platinum, industrial use Pt-10wt%Rh alloy and ZrO2 dispersion strengthened platinum.
RkJQdWJsaXNoZXIy MjM0NDE=