ICF10B

(a)Low magnification (b) High magnification (a)Low magnification (b) High magnification Fig.7 SEM photograph of specimen surface (S=120MPa) Fig.8 SEM photograph of fracture surface (S=120MPa) CONCLUSIONS Fatigue test on the Pt-10wt%Rh alloy at 293K and 1073K were performed. Fatigue strength of Pt-10wt%Rh were 100MPa at 293K, and 30MPa at 1073K. It had broken in ductile fracture at both temperature range, and it was proven that the sliding in the grain was dominant for the deformation of the PtRh alloy. In low stress, high temperature side, there would be the effect of the creep, and there were crack and opening in the grain boundary. Fatigue breakdown behavior of pure-Pt and ODS-Pt is under investigated. REFERENCES (1) K. Kikuchi, Y. Kaji, Y. Muto, S. Kitade, Trans.JSME, 59-557,A(1993-1), pp94-99 (2) R. Ohtani, T.Kitamura, M.Tsutsumi, H. Miki, Trans.JSME, 59-560,A(1993-4), pp933-938 (3) T.Kitamura, R. Ohtani, W. Zhou, M. Yamada, N. Iizuka, Trans.JSME, 59-566A(1993-10), pp2234-2240 (4) H.Suzuki, S. Numata, K. Katahira, Trans.JSME, 63-616A(1997-12), pp2679-2685 (5) H.Suzuki, S. Numata, S. Nishino, Trans.JSME,63-610A(1997-6) ,pp.1141-1146 (6) S. Numata, K. Katahira, H.Suzuki, Trans.JSME,64-619,A(1998-3) pp.597-602 (7) T. Hamada, thesis, Osaka Univ. (1998) (8) T. Hamada, S. Hitomi, T. Nishimori and S.Nasu, THERMEC’97 International Conference on Thermomechanical Processing of Steels and Other Materials, (1997), pp.1647-1653

RkJQdWJsaXNoZXIy MjM0NDE=